We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping pole extending 13 to 20 inches, CNC projector plate and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. EPSON-HC880-LAT-13 projector accessory 13-20 in

SKU CH-R04X-F1XX1

Aircraft-aluminium ceiling mount telescopes from 13 to 20 inches and includes 360-degree rotation, pitch, roll and 1.5-inch lateral shift for Epson Home Cinema 2350, 880, 880X and VS260 projectors

  • Product typeProjector Mounts
  • Telescoping pole adjusts 13 to 20 inches from ceiling in one-inch steps
  • CNC-machined 6061-T6 aircraft aluminium plate fits Epson Home Cinema 2350, 880, 880X, VS260 only
  • 360-degree rotation plus pitch and roll for flexible image alignment
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • All installation hardware and detailed instructions included for quick setup

Compatible Epson Projector Models

This ceiling mount is built for the Epson Home Cinema 2350, 880, 880X and VS260 projectors. The CNC-machined mounting plate is designed to fit only those models, ensuring correct weight distribution and airflow around the unit. Buyers with any other projector make or model cannot use this mount.

Installation and Lateral Adjustment

All required hardware and detailed instructions are included for a straightforward installation. The telescoping extension adjusts in one-inch increments to position the projector 13 to 20 inches from the ceiling. A lateral shift coupling provides 1-1/2 inches of side-to-side movement to centre the lens when the ceiling mounting point is off-centre. This mount is not intended for drop or false ceilings.

13 to 20 Inch Extension Range

The telescoping arm sets the projector approximately 13 to 20 inches below the ceiling surface in one-inch steps. This fixed range is the critical specification that determines whether the mount suits the room's ceiling height and desired projector placement.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $70.99
Pricier than about 77% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

How can I verify the mount is holding the projector securely after installation?

After mounting, confirm the projector sits level, the telescoping pole locks at one of the 13 to 20 inch settings in 1 inch increments, the 360 degree rotation moves smoothly, and the 1-1/2 inch lateral shift centres the lens on the screen.

What hardware is included and what must I supply separately?

The package provides the CNC-machined 6061-T6 aircraft aluminium projector plate, the telescoping extension column, the lateral shift coupling, and all bolts and screws needed for the projector side; you must supply ceiling anchors or lag bolts suitable for your ceiling structure.

My projector is an Epson Home Cinema 2350 — will this exact mount fit?

Yes, the mount is built specifically for the Epson Home Cinema 2350, 880, 880X and VS260 models; the plate you receive may look different from the photo but will match the mounting holes of those four models only.

More in Projector Mounts & Add-Ons

Similar items