Projector Ceiling Mounts Direct, LLC. EPSON-VS230-LAT-13 projector accessory

Epson VS-Series Ceiling Mount

This projector ceiling mount is built specifically for Epson VS230 VS240 VS330 VS335W VS340 and VS345 models. It uses a model-specific plate machined from 6061-T6 aircraft aluminum to ensure a precise fit. The design leaves room around the projector for heat to escape during operation. It is intended for solid ceiling installations only, not for drop or false ceilings.

Lateral Shift and 360 Rotation Under Load

The mount provides 360-degree rotation plus pitch and roll adjustment so the image stays aligned even after the projector warms up. A lateral shift coupling gives 1-1/2 inches of side-to-side travel to centre the lens when the ceiling joist is off-centre. The telescoping extension locks in 1 inch increments between 13 and 20 inches from the ceiling, keeping the projector stable during extended use. All movement points are secured with included hardware so the position holds over time.

Aircraft Aluminum Build and Daily Mounting

The CNC machined 6061-T6 aluminum plate and arm resist flexing when the projector is adjusted or serviced. Every bolt and spacer needed for installation ships in the box with detailed instructions for a quick setup. The projector plate you receive may look different from product photos but will match the listed Epson models exactly. This mount cannot be used with suspended ceiling grids or any projector outside the named VS series.