We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping arm extending 13 to 20 inches, lateral shift coupling and 360 degree rotation

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct, LLC. INFOCUS-IN124x-LAT-13 projector accessory

SKU CH-HHGQ-M6ZAB

Ceiling mount for Infocus IN124x, IN126x, IN128HDx, IN124STx and IN126STx projectors with 13 to 20 inch telescoping extension and 360 degree rotation

  • Product typeProjector Mounts
  • Telescoping extension positions the projector 13 to 20 inches from the ceiling
  • 360-degree rotation with pitch and roll adjustment for flexible image alignment
  • 5-inch lateral shift coupling centres the lens when the mount is off-centre
  • CNC-machined 6061-T6 aircraft-grade aluminium plate ensures a precise, model-specific fit
  • All required hardware and detailed instructions included for a quick installation

Compatible Infocus Projector Models

This ceiling mount fits Infocus IN124x, IN126x, IN128HDx, IN124STx and IN126STx projectors only. The CNC-machined mounting plate is designed for precise fitment on these specific models. Buyers with different projector makes or models cannot use this mount. The plate supplied may look different from product images but will fit the listed units.

Telescoping Range and Adjustment

The extension sets the projector approximately 13 to 20 inches from the ceiling in one-inch increments. A lateral shift coupling provides 1-1/2 inches of left or right adjustment to centre the lens when the mounting surface is off-centre. The mount rotates 360 degrees and allows pitch and roll in any direction for image alignment. This design is not intended for drop or false ceilings.

Aircraft Aluminium Construction

The mount uses 100 percent 6061-T6 aircraft-grade aluminium for durability. All necessary hardware and detailed instructions are included for straightforward installation. The minimal-coverage plate design leaves adequate space around the projector for heat to escape. Buyers needing a universal mount or drop-ceiling compatibility should choose a different product.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $62.99
Pricier than about 66% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

How do I install the projector ceiling mount and which step is often missed?

Attach the CNC-machined 6061-T6 aluminum plate to the projector using the included hardware, then secure the telescoping arm to a structural ceiling joist — not drywall — and set the extension between 13 and 20 inches in 1-inch increments. The step most often missed is verifying the joist can support the load before drilling.

What maintenance or replacement will this mount need over time?

The aircraft-grade aluminum construction resists corrosion, so no scheduled replacement is required. Periodically check that all bolts remain tight and that the 360-degree rotation, pitch and roll joints move freely; apply a light machine oil to the lateral shift coupling if it stiffens.

What limit appears first during sustained use of this ceiling mount?

The telescoping extension locks at 20 inches maximum drop, so the first hard limit is physical reach — if the ceiling is higher than the mount can span, the projector cannot be positioned low enough without an additional extension column.

More in Projector Mounts & Add-Ons

Similar items