Projector Ceiling Mounts Direct, LLC. MITS-XD360U-EST-MM projector accessory

Precision Fit for Mitsubishi XD360U-EST

This ceiling mount is engineered exclusively for the Mitsubishi XD360U-EST and XD365U-EST projector models. It uses a CNC-machined 6061-T6 aircraft aluminium plate that matches the chassis mounting points precisely. The design leaves adequate clearance for heat dissipation while keeping the projector profile minimal. Installers receive all required hardware and detailed instructions for drywall or wooden beam mounting.

5-Inch Fixed Extension from Ceiling

The mount positions the projector approximately 5 inches below the ceiling surface with no adjustable drop column. This fixed offset suits installations where a low-profile, permanent position is required. The bracket is not intended for drop or false ceiling grids. Buyers needing a longer or adjustable extension should select a different mounting system.

Full 360-Degree Rotation and ±80° Tilt

A 360-degree yaw joint and ±80-degree pitch/roll articulation allow precise image alignment after the plate is secured. The rigid 6061-T6 aluminium construction prevents flex during adjustment so the image stays locked once set. No active cooling or moving parts are present, so the mount adds zero noise and draws no power.