We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium projector ceiling mount with telescoping pole extending 13 to 20 inches

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct OPTOMA-PRO150S-LAT-13 Projector Accessory 13-20 in Extension

SKU CH-2HS9-QKW6S

Adjustable ceiling mount positions compatible Optoma projectors 13 to 20 inches down with 360-degree rotation and lateral shift for precise alignment

  • Product typeProjector Mounts
  • Adjustable distance with 13 to 20 inch telescoping extension
  • Lightweight strength from 100% 6061-T6 aircraft aluminum build
  • Quick setup using all included hardware and clear instructions
  • Precise alignment via 1-1/2 inch lateral shift coupling
  • Secure fit for Optoma PRO150S, PRO160S, PRO180ST, PRO250X, PRO260X projectors

Compatible Optoma Models

This projector mount fits the Optoma PRO150S, PRO160S, PRO180ST, PRO250X and PRO260X models only. It is not suitable for other projectors or for drop-ceiling installations. The CNC-machined plate ensures precise fitment for these specific units. Buyers with different projector makes or models cannot use this accessory.

Telescoping Extension Range

The telescoping arm positions the projector 13 to 20 inches from the ceiling in 1 inch increments. This fixed range provides headroom for standard ceiling heights but runs out in rooms needing shorter or longer drops. The lateral shift coupling adds 1-1/2 inches of left/right adjustment to centre the lens. Installations requiring drop-ceiling mounting or extension beyond 20 inches need a different solution.

Aircraft Aluminium Construction

The mount uses 100% 6061-T6 aircraft aluminium for a rigid, lightweight frame. The design leaves adequate space around the projector for heat to escape during operation. Full 360-degree rotation plus pitch and roll adjustment allow precise image alignment. All necessary hardware and detailed instructions are included for straightforward installation.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $68.99
Pricier than about 73% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

Will the 13-20 inch telescoping extension clear a low-hanging light fixture when used with an Optoma PRO150S?

The extension adjusts in one-inch increments from 13 to 20 inches, so you can set the projector low enough to clear most fixtures while keeping the Optoma PRO150S secure.

How do I confirm the lateral shift coupling is centred after mounting an Optoma PRO250X?

The coupling provides 1-1/2 inches of left-right travel; centre the lens visually on the screen, then lock the coupling bolts — no further calibration is needed.

Does the box include ceiling anchors for a concrete slab, or only the mount and projector plate for the Optoma PRO160S?

All necessary hardware is included — projector-specific plate, telescoping pole, lateral shift coupling and mounting bolts — but concrete anchors are not supplied.

More in Projector Mounts & Add-Ons

Similar items