We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm extending 13 to 20 inches, lateral shift coupling, and CNC machined projector plate

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct OPTOMA-ZH420UST-LAT-13 projector accessory

SKU CH-QT6V-TG49B

Aircraft-aluminium ceiling mount with 360° rotation and 13–20 inch telescoping extension for Optoma ultra-short-throw projectors

  • Product typeProjector Mounts
  • Aircraft-grade 6061-T6 aluminium ensures rigid, lasting support
  • Telescoping extension positions projector 13 to 20 inches from ceiling
  • 360-degree rotation plus pitch and roll allows precise image alignment
  • Lateral shift coupling centres lens when ceiling mount is off-centre
  • Custom CNC-machined plate fits listed Optoma models only

Compatible Optoma UST Models

This ceiling mount is engineered specifically for the Optoma EH340UST, W340UST, ZH420UST-B and ZH420UST-W ultra-short-throw projectors. The CNC-machined mounting plate ensures a precise fit using minimal projector coverage, leaving adequate space for heat to escape during operation. Installers who need a dedicated bracket for these exact models will find the hardware and instructions included for a straightforward setup. Buyers with different projector makes or models cannot use this mount.

Telescoping Extension Range

The telescoping arm positions the projector approximately 13 to 20 inches from the ceiling in one-inch increments, allowing fine depth adjustment for the installation. A 360-degree rotation joint combined with pitch and roll movement lets the installer align the image precisely without moving the ceiling anchor. The lateral shift coupling provides 1-1/2 inches of left/right travel to centre the lens when the mounting surface is off-centre. This mount is not intended for drop or false ceilings.

Aircraft-Grade Aluminium Build

The entire structure is machined from 100% 6061-T6 aircraft aluminium for rigid, long-term durability under continuous use. The custom plate design covers only the necessary mounting points, maximising airflow around the projector chassis. Actual plate geometry may differ from product images but is guaranteed to fit only the listed Optoma models. Installers requiring a universal bracket or a solution for suspended ceiling grids must look elsewhere.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $64.99
Pricier than about 68% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

How do I install the OPTOMA-ZH420UST-LAT-13 mount and what is the common mistake?

Attach the CNC-machined plate to the Optoma ZH420UST, secure the telescopic column to a structural ceiling joist, then rotate the 360-degree ball joint for aim. The step often missed is using the 1-1/2 inch lateral shift coupling to centre the lens when the joist is off-centre.

What maintenance or replacement will this mount need over time?

The 6061-T6 aluminium construction and included hardware are rated for the projector's service life. No lubrication or periodic part replacement is required; only re-check bolt torque if the ceiling structure settles or vibrates.

What physical limit appears first when the projector runs continuously on this mount?

The mount holds the Optoma ZH420UST 13 to 20 inches from the ceiling in 1-inch steps. The earliest constraint is the fixed 20-inch maximum drop, which may limit airflow clearance in rooms with very high ceilings.

More in Projector Mounts & Add-Ons

Similar items