We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium ceiling mount with telescoping arm and lateral shift coupling

Projector Ceiling Mounts Direct, LLC.

Projector Ceiling Mounts Direct VIEWSONIC-LS920WU-LAT-13 Projector Accessory

SKU CH-F3FS-YJ41G

Aircraft-aluminium ceiling mount for ViewSonic LS920WU and LS921WU projectors with 360-degree rotation, 13 to 20 inch telescoping extension and 1-1/2 inch lateral lens shift

  • Product typeProjector Mounts
  • Compatible with ViewSonic LS920WU and LS921WU projectors
  • Telescoping extension sets projector 13 to 20 inches from ceiling
  • 360-degree rotation with pitch and roll adjustment
  • CNC-machined 6061-T6 aircraft aluminum mounting plate
  • 1-1/2 inch lateral shift coupling centers lens

VIEWSONIC LS920WU LS921WU Projector Mount

This ceiling mount is engineered specifically for ViewSonic LS920WU and LS921WU projectors. It provides a precise, model-dedicated fit that universal mounts cannot match. The design ensures minimal coverage of the projector chassis while leaving adequate space for heat to escape during operation. Installers receive all necessary hardware and detailed instructions for a quick setup.

360 Rotation with Lateral Shift Adjustment

The mount rotates a full 360 degrees and allows pitch and roll adjustments in any direction. A Lateral Shift Coupling provides 1-1/2 inches of left and right movement to centre the lens when the ceiling mounting point is not perfectly aligned with the screen. This flexibility simplifies image alignment without requiring the projector to be physically repositioned on the plate.

6061-T6 Aluminium Construction

The mounting plate is CNC machined from 100% 6061-T6 aircraft-grade aluminium for a rigid, durable installation. A telescoping extension arm sets the projector between approximately 13 and 20 inches from the ceiling in one-inch increments. This mount is not intended for drop or false ceiling installations and requires a solid structural mounting surface.

How it compares

Measured against everything we stock in Projector Mounts & Add-Ons, at today’s prices. Recalculated every night.

Price $68.99
Pricier than about 73% of the 5,120 comparable items (median $52.99).

Specifications

Product
Product typeProjector Mounts

Questions about this item

How do I set the 13 to 20 inch extension length during installation, and what step do people often miss?

Extend the telescoping pole to the desired inch mark, then tighten both locking collars; the step most people miss is securing the secondary set screw that prevents the pole from rotating under projector weight.

What maintenance will this mount need after it is installed?

Check the four main bolts and the lateral shift coupling set screws every six months; vibration from the projector fan can loosen them, and the 6061-T6 aluminum threads will not strip if re-torqued correctly.

What is the first limit I will hit if I keep adjusting the lateral shift coupling daily?

The coupling allows 1-1/2 inches of left or right travel; once that range is used the lens cannot be centred further without moving the ceiling anchor points.

More in Projector Mounts & Add-Ons

Similar items