ProX XC-MYP03 3 ft 3.5 mm Mini-TRS to dual 1/4 in TS-M Y cable accessory
A 3 ft unbalanced Y cable splits a 3.5 mm Mini-TRS connection to dual 1/4 in TS plugs, built with 93% braided OFC copper shield for low-noise live sound use
- Clean signal transfer with 93% braided OFC copper shield
- Connects 3.5 mm Mini-TRS to dual 1/4 in TS-M
- Compact diameter reduces eddy currents for clarity
- Tour-grade build resists bending and twisting
- 3 ft length suits stage and studio routing
ProX XC-MYP03 3 ft Y-cable
The ProX XC-MYP03 is a 3 ft unbalanced Y-cable that splits a 3.5 mm Mini-TRS connection into dual 1/4 in TS-M plugs. It is built for professional touring and live sound applications where a portable device or interface must feed two line-level inputs on a mixer or stage box. The compact diameter keeps cable runs tidy on crowded stages.
Braided OFC shield for noise rejection
A 93 % braided oxygen-free copper shield surrounds the conductors to reject electromagnetic interference and preserve signal purity. The compact cable diameter is engineered to minimise eddy currents that can degrade high-frequency detail. Complete Coil winding technology enforces tight weave tolerances for consistent impedance and accurate sound reproduction.
Tour-grade durability for repeated setup
The cable jacket and strain reliefs are designed to withstand repeated bending, twisting and coiling during load-in, performance and load-out. Connectors are secured for reliable contact over years of professional use. No adapters, software or additional accessories are bundled; the cable itself is the complete solution.
How it compares
Measured against everything we stock in Studio & Stage Accessories, at today’s prices. Recalculated every night.
- Price $17.99
- Cheaper than about 67% of the 351 comparable items (median $23.99).
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 3.5 mm Mini-TRS end to my device?
Plug the single 3.5 mm TRS connector into the stereo output of your source device; the Y-split then sends left and right channels to two separate 1/4 in TS plugs for mono inputs.
What part of this cable is most likely to wear out first?
The 1/4 in TS plugs and the Y-junction see the most physical stress; the 93 % braided OFC shield and Complete Coil construction are designed to resist fatigue from repeated bending and twisting.
What limits performance during a long show?
The unbalanced design means induced noise can accumulate over the 3 ft run in high-EMI environments, so keep the cable away from power dimmers and lighting ballasts.
More in Studio & Stage Accessories
