We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of silver metal T-adapters, 17 inches long, adjustable latches, cotter pins

ProX

ProX XT-TADAPTER-U Set of 2 Universal T-Adapters 17 in

SKU CH-TPRZ-A4HEY

Two 17-inch universal T-adapters connect triangle or square truss to 35 mm crank or fixed tripod stands with sliding latches from 4.5 to 13 inches and safety cotter pins

  • Set of two adapters expands mounting options
  • 17 inch length provides stable truss support
  • Adjustable latches span 4.5 to 13 inches for flexible positioning
  • Safety cotter pin prevents bolt from sliding out
  • Fits 35 mm poles on crank or fixed tripod stands

Universal T-Adapters for Truss Systems

The ProX XT-TADAPTER-U set includes two 17 in universal T-adapter brackets built for F32, F33 and F34 triangle or square truss segments. They are designed for professional DJs, event planners and stage designers who need to connect trussing to crank stands or fixed tripod stands with a 35 mm pole.

Installing the Adapters

Each bracket slides onto the stand pole and the latches adjust from 4.5 in to 13 in on centre before locking into place with a safety cotter pin that prevents the bolt from sliding out. The mechanism works with ProX XT-CRANK18FT-330, XT-CRANK14FT-220 and T-LS132 stands as well as Global Truss ST-90, ST-132 and ST-157 models.

Capacity and Headroom

The 17 in length provides ample support for standard triangle and square truss runs in typical event and stage configurations. The adjustable latch range covers common truss widths, but very wide custom truss spans or non-standard pole diameters fall outside the design limits.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $76.99
Pricier than about 84% of the 5,998 comparable items (median $24.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the latches are locked at the correct width after mounting the adapter on a 35 mm pole?

Slide each latch until the center-to-center distance reads between 4.5 in and 13 in, then verify the safety cotter pin is fully seated so the bolt cannot slide out.

What comes in the package and what extra hardware is needed to attach F34 truss segments?

The box contains two 17 in universal T-adapter brackets with sliding latches and cotter pins; you only need the truss segments and a compatible crank or tripod stand with a 1 3/8 in pole.

Which adapter version should I choose for a ProX XT-CRANK18FT-330 stand and Global Truss ST-132 sections?

This single XT-TADAPTER-U model fits both the ProX XT-CRANK18FT-330 and Global Truss ST-132, as well as ST-90 and ST-157, so no other version is required.

More in Tech Gadgets & Accessories

Similar items