We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten triangular stainless steel corner brackets in a compartmented case with screws and a driver bit

QSJ Bracket 001 10 Pack 2.48 in 0.08 in Thick Stainless Steel Triangular Corner Brace

SKU CH-K6C5-ZBDX6

Pack of ten 2.48-inch stainless-steel triangular corner braces with 70 screws and a driver bit for furniture reinforcement

  • Tube sizeSilver, 2.48 in
  • Thread sizeSilver, 2.48 in
  • Pipe sizeSilver, 2.48 in
  • Size or dimensions10.4 in × 2.3 in × 0.71 in
  • Surface finishUnfinished
  • Sold asPack
  • Strong corrosion resistance from stainless steel construction
  • Ready-to-install kit includes 70 M4x16 screws and driver bit
  • Ten 2.48 in triangular brackets reinforce corners effectively
  • Five-compartment case keeps hardware sorted and accessible
  • Suitable for furniture, cabinets, shelves and general reinforcement

Ten-pack triangular corner braces

This QSJ bracket set supplies ten stainless-steel triangular corner braces measuring 2.48 in with a thickness of .08 in. Each pack includes 70 M4x16 stainless-steel screws and one Phillips screwdriver bit, all stored in a five-compartment case. The hardware is designed for wood furniture, cabinets and shelves.

Reinforcing loose or new joints

These brackets replace worn L-brackets or add strength where flat mending plates were previously used. The 2 mm thickness and included fasteners make the upgrade worthwhile when existing hardware has stripped screw holes or when assembling new units that need rigid ninety-degree support.

DIY assemblers and furniture repair

Homeowners assembling flat-pack furniture or reinforcing wobbly cabinets will appreciate the all-in-one kit and organised case. Builders who need heavier gauge steel, larger bracket dimensions or a different finish should look at alternative hardware.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 73% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameQSJ
Model nameBracket
Part number001
Processor
Thread sizeSilver, 2.48 in
Size & build
Tube sizeSilver, 2.48 in
Pipe sizeSilver, 2.48 in
Size or dimensions10.4 in × 2.3 in × 0.71 in
Surface finishUnfinished

Questions about this item

Will the 2.48 in brackets clear the 0.71 in pack height inside a standard cabinet?

Each triangular brace is 2.48 in per leg and 0.08 in thick, so the pack height of 0.71 in is just the stacked case, not the installed profile.

Which fasteners go in first when using the supplied M4x16 screws and Phillips bit?

Drive the 70 screws through the bracket holes into the wood before fully tightening any single one; this keeps the 2.48 in legs aligned.

How often should the stainless brackets be checked or replaced in a damp kitchen?

The 0.08 in thick stainless steel resists corrosion, but inspect the 70 screw joints annually and retighten any that have loosened.

More in Hose Fittings, Adapters & Clamps

Similar items