Raspberry Pi Pico 22AJ1097 RP2040 2MB Flash Pack of 2 development board
Dual-core ARM Cortex M0+ microcontroller board with 2MB flash, 26 GPIO pins, and drag-and-drop USB programming, two per pack
Name 2-pack
- 1-pack$6.99
- 2-pack$11.99
- 3-pack$15.99
- Dual-core Cortex M0+ runs up to 133 MHz for responsive real-time control
- 2 MB on-board Flash stores code and data without external chips
- 26 multi-function GPIO pins connect sensors, displays and actuators directly
- Drag-and-drop USB mass-storage programming lets you start in seconds
- Eight programmable I/O state machines create custom peripherals in hardware
Dual-core microcontroller for embedded projects
The Raspberry Pi Pico 22AJ1097 uses the RP2040 chip with two ARM Cortex M0+ cores running up to 133 MHz. Each board provides 264kB of SRAM and 2MB of on-board Flash memory. This pack of two suits hobbyists, students and engineers building custom IoT edge devices or learning microcontroller programming in C or MicroPython.
Low-power operation with minimal heat
The RP2040 draws very little current and includes sleep and dormant modes for battery-powered designs. No active cooling is required during normal use, so the boards run silently. Power is supplied over the USB 1.1 port, which also handles drag-and-drop programming via mass storage.
Castellated edges and rich I/O for integration
Each module has castellated pads for direct soldering to carrier boards. You get 26 multi-function GPIO pins, two SPI, two I2C, two UART, three 12-bit ADC channels and 16 PWM channels. Eight Programmable I/O state machines allow custom peripheral support, while an on-chip temperature sensor and accelerated floating-point libraries expand application possibilities.
How it compares
Measured against everything we stock in Single-Board Computers & Dev Kits, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 95% of the 1,420 comparable items (median $44.99).
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Raspberry Pi |
| Model name | 22AJ1097 |
| Part number | 22AJ1097 |
Other versions of this model
2 more in the same range
Raspberry Pi Pico 22AJ1097 RP2040 2MB Flash Pack of 3 development board
Questions about this item
How do I install the Pico on a carrier board and which orientation step do people get wrong?
Align the castellated edges with the carrier-board pads and solder each pad; the USB connector must face the board edge so the micro-USB port remains accessible after mounting.
What maintenance will the on-board 2MB Flash need over time?
The Flash is non-volatile and requires no scheduled maintenance; firmware updates are applied by dragging a new UF2 file onto the mass-storage device that appears when the board is plugged in.
What limit appears first when both Cortex-M0+ cores run continuously at 133 MHz?
The 264kB SRAM fills before the Flash or GPIO bandwidth, so sustained dual-core workloads must fit code and data within that memory space.
More in Single-Board Computers & Dev Kits
Similar items
NVIDIA Jetson AGX Orin 64GB Development Board 945137300050000
- 12-core Arm Cortex-…
- 64 GB 256-bit LPDDR…
Raspberry Pi 2773729 1.4GHz 1GB LPDDR2 development board
- Broadcom BCM2837B0,…
- 1 GB LPDDR2 SDRAM
AAAwave Raspberry Pi Aluminium Case Kit with Laminated Frame and Heatsink
micro:bit 83-17934 development board
- ARM Cortex
- ARM Cortex M0 32-Bi…







