Red Hat 8210G037 Solenoid Valve Trap 1/2 in 110V 120V AC
A 2-way, normally closed solenoid valve with a 1/2 in stainless steel body, 7/16 in orifice, 2.2 Cv flow and 150 psi air rating for 110/120 V AC operation
- Product typeDrain Components
- Main materialHAWA
- 2-way normally closed design gives reliable on/off control
- High-flow 7/16 in orifice with 2.2 Cv moves fluid efficiently
- Stainless-steel body resists corrosion in demanding environments
- NBR seals handle air and inert gas up to 150 psi
- Watertight coil enclosure protects 110V/120V AC operation
Industrial Solenoid Valve 1/2 in
The Red Hat 8210G037 is a two-way normally closed solenoid valve built for air and inert-gas service. Stainless-steel body and NBR seals suit industrial plumbing and fluid-control systems that need reliable on-off actuation. It operates on 110 V or 120 V AC with a watertight coil enclosure.
1/2 in NPT Connection Integration
The valve threads into standard half-inch piping and requires a compatible 110/120 V AC control signal. Its 7/16 in orifice and high-flow design free up flow capacity compared with smaller orifices while the watertight coil protects the actuator in wet or wash-down environments.
Cv 2.2 Flow Capacity Headroom
A flow coefficient of 2.2 handles typical air and inert-gas loads up to 150 psi differential pressure. The valve is not rated for fuel gas or fuel oil service so systems using those media must select a different model. Voltage is fixed at 110/120 V AC; other control voltages are not supported.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $357.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8210G037 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
At what pressure will the 8210G037 stop sealing reliably during continuous air service?
The valve is rated for a maximum operating pressure differential of 150 psi with air or inert gas; sustained use above that limit can prevent positive closure.
How much heat does the coil generate when the valve stays energised all day?
The watertight coil enclosure on the 8210G037 is designed for continuous 110V or 120V AC duty, but the supplier data does not publish a coil wattage or surface-temperature figure.
What pipe fittings must I already have to install this 1/2 in NPT valve?
You need mating 1/2 in NPT pipe threads on both inlet and outlet, plus thread sealant or tape compatible with stainless steel and NBR seals.
More in Drain Stoppers, Strainers & Traps
Similar items
Apollo 7650801 2 in FNPT Stainless Steel Ball Valve Inline Trap
- Drain Components
Liberty 405 Commercial Sink Pump System 1/2 HP 2 In
- Drain Components
- Polyolefin





