Red Hat 8210G056 120V AC Brass Solenoid Valve Trap
A 120V AC brass solenoid valve with a 1 1/4 inch orifice and 22.5 Cv flow rating, normally closed for high-flow drainage control up to 150 psi
- Product typeDrain Components
- Normally closed design prevents unwanted flow
- 120V AC coil suits standard mains voltage
- Brass body resists corrosion in fluid systems
- High-flow 22.5 Cv handles large volume
- Watertight coil enclosure protects electrical components
Brass Solenoid Valve 1 1/2 in
The Red Hat 8210G056 is a 120V AC brass solenoid valve with a 1 1/2 inch nominal pipe size and 1 1/4 inch orifice. It operates as a normally closed, two-way high-flow drain component rated for a maximum air or inert gas pressure differential of 150 psi. The valve body uses brass construction with NBR seals and a watertight coil enclosure. It carries a Cv rating of 22.5 for flow capacity.
Installation Suitability
This valve suits plumbing systems requiring 120V AC actuation for on-off control of air or inert gas lines at 1 1/2 inch pipe size. Installers needing fuel gas, fuel oil, or higher pressure ratings should look elsewhere. Buyers who want a normally open configuration or a different voltage will need another model. The Proposition 65 notice also applies for California installations.
120V AC Normally Closed Operation
The valve opens only when the 120V AC coil is energised and closes when power is removed. This normally closed behaviour is the single specification that decides whether the part matches the safety or control logic of the circuit. Verify that the system design calls for power-to-open action before purchasing.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $446.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8210G056 |
| Product type | Drain Components |
Questions about this item
Will the 1 1/2 in pipe size and 22.5 Cv flow work with my existing brass piping?
The valve uses a 1 1/2 in nominal pipe size with a 1 1/4 in orifice and brass body, matching standard brass piping of the same size.
How can I verify the 120V AC coil is operating correctly after installation?
Apply 120V AC power and confirm the normally closed valve opens; the watertight coil enclosure protects the electrical connection during operation.
Does the box include the NBR seals and mounting hardware, or must I buy them separately?
The valve ships with the NBR seal material installed in the brass body; no separate seals or mounting hardware are mentioned as included.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC SV10050STE 120VAC PVC Solenoid Valve Trap 1/2 in
- Drain Components
- HAWA
Flint & Walling 135627 Booster Cartridge 11 Stages
- Drain Components





