Red Hat 8210G093 24V DC Brass Solenoid Valve Trap
A 24V DC brass solenoid valve for air, inert gases and water with a 3.0 flow coefficient and 40 psi pressure rating
- Product typeDrain Components
- 24 V DC coil enables low-voltage control
- Normally closed design stops flow when de-energised
- Brass body resists corrosion from air, water and inert gases
- 0 Cv coefficient delivers high flow capacity
- Rated for 40 psi differential pressure with air and water
24V DC Brass Solenoid Valve
This normally closed valve controls air, inert gases and water in a 2-way, 2-position configuration. The brass body and Class F coil insulation suit indoor or outdoor plumbing and automotive tool installations. It operates on 24V DC power and requires no minimum pressure differential to open.
Sustained pressure performance
The valve maintains a 3.0 coefficient of volume across its rated range. Maximum operating pressure differential is 40 psi for both air or inert gas and water service, while light oil duty is not rated. This limit applies continuously rather than only during brief actuation cycles.
3/8 inch pipe interface
The 3/8 inch pipe size sets the practical flow capacity for the system. California Proposition 65 warnings note the presence of chemicals known to cause cancer and reproductive harm, which may restrict use in certain regulated environments. No other media or pressure ratings are specified for this model.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $132.99
- Pricier than about 81% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8210G093 |
| Product type | Drain Components |
Questions about this item
How much power does the 24V DC coil draw when the valve runs continuously?
The coil is rated for Class F insulation and a 24V DC supply; continuous duty is supported within the specified pressure range.
What pipe fittings and media supply are needed to install the 3/8 in brass valve?
It requires 3/8 inch pipe connections and a clean supply of air, inert gas, or water at up to 40 psi differential.
Will the 3.0 Cv flow coefficient work with older 3/8 in piping in my system?
The 3.0 Cv rating matches standard 3/8 inch lines for air, inert gas, or water service up to 40 psi.
More in Drain Stoppers, Strainers & Traps
Similar items
Anvil
Anvil 0308008804 Cast Iron Reducing Companion Threaded Flange Class 125 Trap
- Drain Components
- HAWA
$131.99
0.00159636BTC
In stock
Ridgid
Ridgid 37410 Manual Threader Die Head 1 1/2 in NPT trap
- Drain Components
$134.99
0.00163264BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.0001692BTC
In stock