Red Hat 8262R202 Brass Solenoid Valve 1/4 in 100-240V AC/DC NC
A brass solenoid valve controls fluid flow with a 1/4-inch port and 100 to 240V AC/DC operation
- Product typeDrain Components
- Main materialHAWA
- Normally closed design prevents flow until energised
- Brass body resists corrosion in fluid systems
- 300 psi air pressure rating handles demanding applications
- Wide 100 to 240V AC/DC supply simplifies wiring
- 52 Cv coefficient delivers efficient flow control
Brass solenoid valve for fluid control
The Red Hat 8262R202 is a two-way solenoid valve designed for drain and trap applications. Its normally closed configuration stops flow until the coil is energised. The brass body resists corrosion in water and air systems. Installers and maintenance engineers use it where reliable on-off control is required.
1/4 inch nominal pipe size with 5/32 inch orifice
The valve connects to 1/4 inch nominal piping and has an orifice diameter of 5/32 inch. This combination determines the flow capacity and the pressure drop across the valve. Matching these dimensions to the existing line is the single specification that decides whether the part fits the installation.
Handles air and inert gas up to 300 psi
The maximum operating pressure differential for air and inert gas is 300 psi, with a flow coefficient of 0.52 Cv. The NBR seals and 100 to 240V AC/DC coil suit a wide range of control voltages. The unit is not rated for fuel gas or fuel oil service, so those applications need a different valve.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $129.99
- Pricier than about 81% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | 8262R202 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
How does the 0.52 Cv flow coefficient perform in a real system?
The 0.52 Cv rating means the valve passes roughly half a gallon per minute of water with a one psi pressure drop, so size your piping and pump accordingly for the required flow rate.
What does the 100 to 240V AC/DC coil rating limit in practice?
The wide voltage range lets the coil operate on common control voltages worldwide without a transformer, but the 300 psi maximum pressure differential remains the hard limit for air or inert gas service.
What mounting space does the 1/4 inch brass body need?
The valve uses a 1/4 inch NPT thread on a brass body with a 5/32 inch orifice, so allow clearance for the coil enclosure and watertight housing when installing in a panel or manifold.
More in Drain Stoppers, Strainers & Traps
Similar items
Nibco, Inc. 611 Sweat Fitting Tee 4 in Cup × 3
- Drain Components
- HAWA
CHIEF MANUFACTURING CMA100 Ceiling Plate with Adjustable Column 500 lb
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dayton 4A703 Brass Solenoid Valve 1/4 in 3-Way 2-Position Cv .05 .06 125 psi 180°F
- Drain Components





