Red Hat EF8210G004 Solenoid Valve 2-Way Normally Closed 1 in 110V 120V AC 150 psi
A 2-way normally closed solenoid valve with a 1-inch brass body, NBR seals and a Cv of 13, rated for 150 psi air or inert gas at 110 to 120 V AC
- Product typeDrain Components
- Main materialHAWA
- Two-way flow control with normally closed operation
- High 13 Cv coefficient for strong flow capacity
- Brass body resists corrosion in demanding environments
- Explosion-proof and watertight coil enclosure for safety
- Operates on 110V or 120V AC up to 150 psi
1-inch brass solenoid valve for industrial fluid
This two-way normally-closed valve uses a 1-inch NPT port and a brass body rated for 150 psi air or inert gas. The NBR seal and explosion-proof, watertight coil suit hazardous-area installations. It operates on 110V or 120V AC and delivers a Cv of 13 for high-flow drainage or process duties.
Verify pipe size voltage
Confirm the existing piping is 1-inch NPT and that the supply pressure will not exceed 150 psi differential. Check that the control circuit provides 110V or 120V AC and that the media is compatible with brass and NBR. Ensure the installation area allows an explosion-proof coil enclosure.
Fits directly into 1-inch threaded lines without
The valve replaces a straight section of pipe and requires no extra fittings when the thread matches. Its normally-closed action stops flow when power is removed, freeing the system from manual shut-off steps. The coil enclosure protects against moisture and ignition sources in classified zones.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $383.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | EF8210G004 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the valve come with fittings or do I need to supply 1 in pipe connections separately?
The valve body has 1 in nominal pipe size ports; pipe nipples or adapters are not included and must be sourced separately.
How do I choose between the 110V AC and 120V AC ratings shown for this model?
The coil is dual-rated for 110V AC and 120V AC; select the rating that matches your supply voltage.
What flow can I expect at the rated 150 psi differential with the Cv 13 orifice?
At 150 psi air differential the Cv 13 orifice delivers approximately 13 US gpm of water equivalent flow.
More in Drain Stoppers, Strainers & Traps
Similar items
Dayton 3BB79 1/2 HP Submersible Sump Pump 120V AC Diaphragm 1-1/2" FNPT
- Drain Components
Zoeller 46-0005 Plug-In Utility Pump 115V AC 14.5in H
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Anvil 306058405 Concentric Reducer Coupling 3 in 2 in Class 125 Schedule 40 175 psi 150 Degrees F
- HAWA





