Red Hat EF8210G007 1/2 in Brass Solenoid Valve 120V AC
A 120 V AC brass solenoid valve with a 5/8 in orifice and 300 psi maximum air pressure differential, normally closed for drain control
- Product typeDrain Components
- Main materialHAWA
- Brass body resists corrosion in fluid systems
- Normally closed design prevents flow until energised
- 300 psi pressure rating handles demanding applications
- Explosion-proof watertight coil enclosure protects electrical components
- 4 Cv flow coefficient delivers high-volume throughput
1/2 in Brass Solenoid Valve for Fluid Control
The Red Hat EF8210G007 is a normally closed, two-way solenoid valve designed for high-flow fluid control in plumbing and industrial systems. It suits installers and maintenance teams needing reliable on-off operation for air, inert gas or compatible liquids through a half-inch pipe connection.
Thermals Noise and Power Draw in Normal Use
The coil operates on 110V AC or 120V AC supply and is housed in an explosion-proof, watertight enclosure. With a maximum operating pressure differential of 300 psi for air and inert gas, the valve handles demanding line conditions without external cooling requirements or audible switching noise in typical installations.
NBR Seals and Explosion-Proof Enclosure Change
NBR seal material provides compatibility with a range of fluids while the explosion-proof, watertight coil enclosure allows deployment in hazardous or wet locations. These features extend the valve's usable environments beyond standard indoor plumbing, though the product carries California Proposition 65 warnings for cancer and reproductive harm.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $309.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | EF8210G007 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
How do I install the 1/2 in brass solenoid valve and what step is commonly missed?
Thread the valve onto 1/2 in pipe using compatible sealant, orient the flow arrow correctly, wire the coil for 120V AC, then verify the explosion-proof conduit seal is tight — that seal step is often overlooked.
What maintenance or replacement will the EF8210G007 need over time?
Inspect the NBR seals and 5/8 in orifice annually; replace the seal kit if leakage appears or if the coil enclosure shows corrosion that could compromise the watertight rating.
What is the first limit reached under sustained use of this normally closed valve?
The 300 psi maximum operating pressure differential for air or inert gas is the primary limit; exceeding it can prevent the valve from closing reliably.
More in Drain Stoppers, Strainers & Traps
Similar items
BELL AND GOSSETT 189165 Seal Bearing Assembly trap
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dayton 16D529 downblast roof exhaust fan 115V 1/30 hp 374 cfm
- Drain Components





