Red Hat EF8210G015 1/2 in Brass Solenoid Valve 2-Way NC 110-120V AC 150 psi 2.2 Cv
A 2-way normally closed brass solenoid valve with a 1/2 in port, 2.2 Cv flow and 150 psi pressure rating for 110-120V AC systems
- Product typeDrain Components
- High-flow design with 2.2 Cv for efficient fluid control
- Normally closed operation ensures fail-safe shutoff when de-energised
- Brass body resists corrosion in demanding environments
- 150 psi pressure rating handles industrial air and inert gas systems
- Explosion-proof watertight coil enclosure rated for 110-120V AC supply
1/2 in Brass Solenoid Valve
The Red Hat EF8210G015 is a 2-way normally closed valve with a brass body and NBR seals. It operates on 110-120V AC and carries a 2.2 Cv flow coefficient. The coil enclosure is rated explosion proof and watertight for demanding industrial environments.
Replaces manual or lower-rated valves
This unit upgrades systems that need automatic shut-off with a 150 psi maximum operating pressure differential for air and inert gas. The jump is worth it when a 7/16 in orifice and high-flow design are required to replace slower or leak-prone legacy components in process lines.
Handles 2.2 Cv flow with 150 psi headroom
The valve comfortably manages air and inert gas service at the rated pressure differential across its 1/2 in nominal pipe size. It runs out when the application demands fuel gas or fuel oil compatibility, which are not rated for this model, or when voltage outside 110-120V AC is needed.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $215.99
- Pricier than about 85% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Red Hat |
| Model name | EF8210G015 |
| Product type | Drain Components |
Questions about this item
What pipe size and thread type does the 1/2 in brass valve body require?
The valve body uses a 1/2 in nominal pipe size with standard NPT threads for direct piping connection.
How do you wire the 110-120V AC coil in the explosion-proof enclosure, and what seal step is often missed?
Remove the enclosure cover, connect leads to the coil terminals, then reinstall the cover with the gasket seated to maintain the watertight and explosion-proof rating.
When should the NBR seals be inspected or replaced in a 150 psi air or inert gas system?
Inspect the NBR seals annually or after 1 million cycles; replace them if leakage appears or the valve fails to close fully at the rated 150 psi differential.
More in Drain Stoppers, Strainers & Traps
Similar items
Dayton 3BB70 1/3 HP Submersible Sump Pump 120V AC Vertical Float 1-1/2" F
- Drain Components
Wheeler-Rex 8806 Telescope Valve Key 72 in
- Drain Components
- HAWA
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Mueller Industries, Inc. 618F 5/8 in OD 60 ft L Trap
- Drain Components





