Reelcraft S601013-35 3/8 in x 35 ft PVC hose trap 300 psi red
A 35 ft red PVC coupled hose assembly with brass MNPT fittings rated at 300 psi working pressure
- Product typeDrain Components
- Product colorRed
- Ready for immediate use with factory-fitted brass MNPT couplings
- Withstands demanding tasks at 300 psi working pressure
- Operates reliably from 0 to 150 degrees Fahrenheit
- 35-foot length gives generous reach around the workspace
- Red PVC cover resists abrasion and stays visible on site
35 ft PVC Air Hose Assembly
The Reelcraft S601013-35 is a 35 foot coupled PVC hose assembly designed for compressed air delivery. It features a 3/8 inch inside diameter and a 5/8 inch outside diameter with a red cover. The assembly is rated for a maximum working pressure of 300 psi at 70 degrees Fahrenheit.
Brass MNPT Fittings Ready to Connect
Both ends are fitted with 1/4 inch male NPT brass couplings so the hose can be threaded directly onto compatible tools or regulators. The PVC tube and cover are built to ANSI B 1.20.1 standards with a 4:1 safety factor. Installers should verify thread sealant compatibility with PVC to prevent fitting damage.
Stable Pressure Up to 150 Degrees F
The hose maintains its 300 psi rating across a temperature range from 0 to 150 degrees Fahrenheit. PVC construction resists kinking during extended runs while the brass fittings hold seal integrity under continuous cycling. The red cover aids visibility in busy work areas.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $49.99
- Pricier than about 62% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Reelcraft |
| Model name | S601013-35 1 |
| Product type | Drain Components |
| Product color | Red |
Questions about this item
How can I verify the hose is holding pressure correctly after connecting it?
Pressurise the line to its 300 psi rating at 70 °F and check for leaks at the brass MNPT fittings; the 4:1 safety factor means it should hold without weeping.
What comes in the box and what must I supply myself?
The coupled assembly arrives with brass 1/4 in MNPT fittings on both ends of the 35 ft red PVC hose; you only need thread sealant or tape for the connections.
Which length and pressure rating should I select for a standard shop air line?
This model provides 35 ft of 3/8 in bore hose rated 300 psi at 70 °F, matching typical shop compressor outputs and the ANSI B1.20.1 thread standard.
More in Drain Stoppers, Strainers & Traps
Similar items
Viega 79135 Bronze Straight Union Press-fit 1 in 3 21/32 in 200 psi 250 °F
- Drain Components
- HAWA
HAYWARD POOL PRODUCTS INC BFAS3010TFS 1" FNPT Bulkhead Tank Fitting trap
- Drain Components
- HAWA





