Reelcraft S601015-100 3/8 in 100 ft PVC Air Hose 300 psi Red
A 100 ft PVC air hose rated to 300 psi at 70 °F with brass MNPT fittings
- Product typeDrain Components
- Product colorRed
- 100 ft reach for large work areas
- 300 psi rating handles demanding air tools
- Brass MNPT fittings resist corrosion and leaks
- PVC construction stays flexible from 0 to 150 °F
- 4:1 safety factor meets ANSI B 1.20.1 standard
Reelcraft 3/8 in 100 ft PVC Air Hose
The Reelcraft S601015-100 is a coupled multipurpose air hose built with PVC tube and cover material. It measures 100 ft in length with a 3/8 in inside diameter and 5/8 in outside diameter. Brass MNPT fittings sized 3/8 in and 1/2 in come pre-attached for immediate connection.
Suits workshops needing 300 psi capacity at 70 F
This hose serves pneumatic tools and compressed-air lines requiring a 300 psi working pressure with a 4:1 safety factor. The temperature range spans 0 to 150 Degrees F. Buyers who need a higher pressure rating, a different fitting configuration, or a non-PVC tube material should consider other options.
300 psi working pressure at 70 F decides fit
The single specification that determines suitability is the maximum working pressure of 300 psi measured at 70 F. Verify that your compressor and tooling operate within this limit before purchasing. The hose meets ANSI B 1.20.1 standards for thread compatibility.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $106.99
- Pricier than about 78% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Reelcraft |
| Model name | S601015-100 1 |
| Product type | Drain Components |
| Product color | Red |
Questions about this item
What size thread does the 3/8 in end of the S601015-100 hose use?
The 3/8 in end uses a 3/8 in MNPT brass fitting that threads directly into a matching female NPT port.
Which step do installers most often miss when connecting the 1/2 in end?
They forget to wrap the 1/2 in MNPT brass threads with PTFE tape before tightening, which can cause leaks at 300 psi.
When should the coupled assembly be replaced based on the 4:1 safety factor?
Replace the hose if the cover shows cracks, the tube hardens outside the 0 to 150 °F range, or fittings corrode.
More in Drain Stoppers, Strainers & Traps
Similar items
Anvil 0308008002 Cast Iron Reducing Companion Flange Trap 2 in Class 125
- Drain Components
Lincoln 5469 Grease Fitting Kit 100 pcs 1/4-28 1/8-27 NPT
- Drain Components





