RIMLANCE RRD17000S8C4 4GB DDR4 2133 ECC Registered RDIMM
4GB DDR4 2133 ECC registered RDIMM with CL15 latency for server workloads
- Total capacity4 GB
- Rated speedDDR4 2133 (PC4 17000)
- ChipsetMajor Brand Chipset
- CAS latencyCL15
- Buffer typeRegistered
- Memory rank1Rx8
- 4GB capacity expands server memory headroom
- DDR4 2133 speed supports high-throughput workloads
- ECC registered design protects data integrity
- 1Rx8 single-rank layout optimises signal stability
- 2V operation reduces power draw
Server Memory for DDR4 Platforms
This 4 GB registered DIMM is built for DDR4 servers and workstations that require ECC protection. It suits administrators expanding capacity in compatible systems where data integrity matters.
Registered Design with 288-Pin Interface
The module uses a registered buffer and 288-pin DDR4 form factor to reduce electrical load on the memory controller. ECC circuitry corrects single-bit errors, while the 1Rx8 organisation fits standard server slots.
Low-Voltage Operation at 1.2 V
Running at 1.2 V and 2133 MT/s with CL15 timing, the DIMM keeps power draw modest in normal server workloads. Major-brand DRAM chips and factory testing support stable thermals and quiet operation in dense chassis.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 95% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $5.00 per GB
- Cheaper than about 73% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | RIMLANCE |
| Model name | RRD17000S8C4 |
| Total capacity | 4 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2133 (PC4 17000) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL15 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx8 |
Questions about this item
What is the DDR4 2133 PC4-17000 interface and what speed does it run at?
The module uses a DDR4 2133 interface rated at PC4-17000, so it transfers data at 2133 MT/s in compatible servers.
What physical slot and pin count does this 288-pin RDIMM require?
It fits a standard 288-pin DDR4 DIMM socket; the registered design and 1Rx8 layout need a server or workstation board that supports registered ECC memory.
How is the module installed and what step is often missed?
Align the notch with the slot key, press firmly until both retention clips click, then confirm in BIOS that ECC and registered mode are enabled for the new stick.
More in ECC Server RAM
Similar items
A-Tech 4GB DDR4 2133 ECC RDIMM 1Rx8 server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 4GB DDR4 2666 ECC RDIMM 1Rx8 CL19 1.2V server RAM
- 4 GB
- 288-Pin DDR4 SDRAM
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
A-Tech 8GB DDR3L 1600MHz ECC RDIMM 2Rx4 1.35V Server RAM
- 8 GB
- DDR3L 1600





