RIMLANCE RRD21300S4C2K16 16GB (2x8GB) DDR4 2666 ECC Registered RDIMM
16 GB dual-channel DDR4 ECC registered memory kit running at 2666 MHz with CL19 latency for servers and workstations
- Total capacity16 GB (2 × 8 GB)
- Rated speedDDR4 2666 (PC4 21300)
- ChipsetMajor Brand Chipset
- CAS latencyCL19
- Buffer typeRegistered
- Memory rank1Rx4
- 16GB dual-channel kit doubles throughput for multi-threaded server workloads
- DDR4-2666 CL19 timing balances speed and latency for responsive data handling
- ECC registered design detects and corrects single-bit errors to protect critical data
- 2 V low-voltage operation reduces power draw and heat in dense racks
- 288-pin RDIMM form factor fits standard DDR4 server and workstation slots
Server Memory Kit for DDR4 Platforms
This 16 GB kit contains two 8 GB registered ECC RDIMMs built for DDR4 servers and workstations. It runs at 2666 MT/s with CL19 latency at 1.2 V. The modules use 1Rx4 organisation and major-brand DRAM chips.
Upgrade from Non-ECC or Lower-Capacity DIMMs
The jump is worthwhile when your workload demands error correction and registered signalling for data integrity. It replaces unbuffered or non-ECC memory that cannot meet server-class stability requirements.
Straightforward 288-Pin Installation
Align the notch with the motherboard key and press firmly until the latches click. The most common issue is mixing registered and unbuffered DIMMs on the same board, which prevents the system from posting.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $106.99
- Cheaper than about 67% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB (2 × 8 GB)
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $6.69 per GB
- Cheaper than about 56% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | RIMLANCE |
| Model name | RRD21300S4C2K16 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
Questions about this item
Will the 288-pin DDR4 2666 RDIMM kit fit my server's DIMM slots?
The kit uses the standard 288-pin DDR4 form factor and runs at 1.2 V. It fits any server or workstation slot designed for DDR4 registered memory.
What is the correct way to install the 2x8 GB registered modules, and what step is often missed?
Power down the system, open the chassis, align each module's notch with the slot key, and press firmly until both retention clips lock. The step often missed is confirming the motherboard requires registered ECC memory before purchase.
How long can the 1Rx4 ECC registered modules run before they need replacement?
The modules are built with major-brand DRAM chips and tested for reliability. No scheduled replacement interval exists; they remain in service until a memory error appears or a capacity upgrade is required.
More in ECC Server RAM
Similar items
Brute Networks 16GB DDR4 2400 CL15 2Rx8 1.2V Non-ECC UDIMM server RAM
- 16 GB
- DDR4 2400
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks HPE P03049-091 8GB DDR4-2933 1Rx8 Registered ECC server RAM
- 8 GB
- DDR4 2933
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks P03049-191 8GB DDR4 2933 1Rx8 ECC Registered RDIMM
- 8 GB
- DDR4 2933





