RODE Microphone VXLR Mini-Jack to XLR Adapter
Converts a 3.5 mm mini-jack output to a male XLR input for on-camera microphones
- Converts 3.5 mm mini-jack to male XLR for camera input
- Accepts stereo input and outputs mono to both channels
- Connects directly to on-camera microphone 1/8" output
- Simple, straightforward and effective adapter design
- Enables mini-jack microphones to plug into XLR camera inputs
Mini-jack to XLR adapter
The Rode VXLR converts a 3.5 mm mono mini-jack into a male XLR output. It plugs straight into an on-camera microphone’s 1/8" socket. The adapter is aimed at videographers who need to feed a mini-jack microphone into a camera’s XLR input. It requires no power and adds no active circuitry.
Signal handling and channel behaviour
A mono 3.5 mm plug is carried straight through to the XLR pins. If a stereo mini-jack is inserted the adapter routes the same mono signal to both left and right channels. This means stereo separation is lost and the camera records identical audio on both tracks. The adapter does not amplify or balance the signal.
Connector-level constraints
The XLR male end fits standard three-pin camera inputs but provides no phantom-power blocking or ground-lift function. Cable length is fixed by the short adapter body, so strain relief depends on the microphone’s own lead. Users needing balanced runs, stereo preservation or phantom-power protection must look for a different interface solution.
How it compares
Measured against everything we stock in Camera Extras & Accessory Packs, at today’s prices. Recalculated every night.
- Price $28.99
- Cheaper than about 61% of the 2,266 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Product type | Other |
Questions about this item
Will the VXLR let me keep using my VideoMic with a camera that only has XLR inputs?
Yes, the adapter converts the microphone's 3.5 mm mono mini-jack output to a male XLR connection so it plugs straight into the camera's XLR socket.
How can I check the adapter is passing audio correctly once I've connected everything?
Monitor the camera's audio meters or listen through headphones; a clean mono signal on both left and right channels confirms the VXLR is working as intended.
Does the package include any cables or just the adapter itself?
Only the VXLR adapter is supplied; you will need your microphone's existing 3.5 mm cable and a standard XLR cable to complete the connection.
More in Camera Extras & Accessory Packs
Similar items
Weinandianzi CSJ-L2101.K206H 13MP IMX214 MIPI Camera Module Autofocus 75° 30PIN
- 13 × 9 × 9 cm
- IMX214
Insta360 CINX2CB/G 2-in-1 Invisible Selfie Stick Tripod 9.6-42.9" camera accessory
Weinandianzi WN-L2007.K114R USB Camera Module 106° 60FPS 1/2.8 IMX307
- 13 × 9 × 9 cm
- Black





