Rothenberger 80007 Plastic Repair Clamp 1/2 in
Reusable plastic clamp fits 1/2 in. pipe with rubber gasket, rated to 87 PSI from 32 to 185 °F
- Reusable clamp cuts repair cost
- fits 1/2 in pipe with .84 in outside diameter
- rubber gasket seals up to 87 PSI
- works from 32 to 185 degrees F
- 3 in length covers the leak zone
Rothenberger 80007 Plastic Repair Clamp
The Rothenberger 80007 is a reusable plastic repair clamp designed for 1/2 inch pipe and tube sizes. It fits an outside diameter of 0.84 inches and uses a rubber gasket to create a seal. This tool suits plumbers and maintenance crews needing a quick, temporary or permanent fix on compatible plastic piping systems. It is supplied new and ready for immediate use.
Capacity and pressure limits
The clamp handles a maximum pressure of 87 PSI within a temperature range of 32 to 185 degrees Fahrenheit. Its 3 inch length covers a localised damage area on the specified pipe size. It will not seal pipes outside the 0.84 inch outside diameter or pressures exceeding the rated limit, so larger diameter lines or high-pressure mains require a different solution.
Thermals and handling in use
The plastic body and rubber gasket remain stable across the stated 32 to 185 degree Fahrenheit range during normal operation. No external power or heat source is needed for installation, so there is no operational noise or power draw to consider. The clamp relies on mechanical tightening force applied by the user to compress the gasket against the pipe wall.
How it compares
Measured against everything we stock in Drain Cleaners & Plumbing Tools, at today’s prices. Recalculated every night.
- Price $27.99
- Cheaper than about 69% of the 1,087 comparable items (median $57.99).
Specifications
| Product | |
|---|---|
| Brand name | ROTHENBERGER |
Questions about this item
Will the 3 in. clamp clear a 1/2 in. copper stub-out that is already soldered to a tee?
The clamp spans 3 in. along the pipe, so measure the straight section between the tee and any obstruction; if at least 3 in. of 0.84 in. OD pipe is exposed the clamp will fit.
How can I confirm the rubber gasket is sealing at the rated 87 PSI after installation?
Pressurise the line to working pressure, then brush soapy water over the gasket seam; steady bubbles indicate a leak, while a dry surface confirms the seal holds at 87 PSI.
Does the 80007 kit include the rubber gasket or must it be purchased separately?
The clamp ships with the rubber gasket already fitted; no separate gasket purchase is required for the 1/2 in. repair.
More in Drain Cleaners & Plumbing Tools
