We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two-piece aluminum shaft collar with alloy steel screws, 1 inch bore

Ruland Manufacturing

Ruland Manufacturing SP-16-A 2-Piece Shaft Collar 1 Inch Aluminum

SKU CH-T74V-3W802

Two-piece aluminum shaft collar with 1 inch bore and 2.03 inch clearance diameter

  • Product typeCouplings, Collars & Adapters
  • Two-piece design allows installation without shaft disassembly
  • 1-inch round bore fits standard inch-series shafts
  • 2024-grade aluminium collar resists corrosion while staying lightweight
  • Alloy-steel clamp screw provides strong holding force
  • 03-inch clearance diameter clears adjacent components

Shaft Collar for 1 Inch Round Bores

This two-piece aluminum collar clamps onto a 1 inch round shaft without keyway or thread. The 2024 grade alloy provides a high strength-to-weight ratio for motion assemblies. Alloy steel screws supply the clamping force.

Replaces One-Piece Collars on Assembled Shafts

The split design installs around bearings, gears or pulleys without sliding components off the shaft end. The jump is worth it when disassembly would add labour time or risk alignment loss on precision equipment.

Fits Builds Needing 2.03 Inch Clearance Diameter

The collar measures 1 3/4 inch outside diameter and 1/2 inch width, leaving space for adjacent hardware. Aluminium construction reduces rotating mass compared to steel alternatives. Proposition 65 listed chemicals are present.

How it compares

Measured against everything we stock in Bearings, Belts & Drive Components, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 83% of the 693 comparable items (median $35.99).

Specifications

Product
Product typeCouplings, Collars & Adapters

Questions about this item

Will the 2.03 in clearance diameter fit inside my housing bore?

The two-piece collar has a 2.03 in clearance diameter, so the housing bore must be larger than that to allow the clamp halves to pass through.

Which screw size and torque should I use when clamping the 1 in bore?

Tighten the alloy-steel socket-head cap screws evenly in a cross pattern to the torque recommended for that screw size; uneven tightening distorts the 2024 aluminum clamp.

How often should I re-check the clamp screws on the 2024 aluminum collar?

Re-torque the alloy-steel screws after the first few hours of operation and then at regular maintenance intervals to maintain grip on the 1 in shaft.

More in Bearings, Belts & Drive Components

Similar items