Crucial CP16G60C36U5B 16GB DDR5 6000 desktop RAM
- 16 GB
- DDR5 6000
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual-channel 8 GB DDR3 kit with two 240-pin DIMMs at 1600 MT/s, CL11, 1.5 V, unbuffered non-ECC
This Samsung kit supplies 8 GB of DDR3 desktop memory in two 4 GB modules. Each stick is a 240-pin DIMM rated at PC3-12800 with a CAS latency of 11. The modules run at 1.5 V and are unbuffered, non-ECC parts. They are intended for standard desktop systems that accept DDR3 DIMMs.
Builders upgrading or repairing a desktop that uses DDR3 memory and has slots able to accept 4 GB per module will find this kit a direct fit. The dual-channel pair delivers 8 GB total capacity for everyday office and home workloads. Buyers who need more than 8 GB of system memory or who require ECC error correction should look at other options. Systems limited to lower per-slot capacities or different memory types cannot use these modules.
The critical specification is the DDR3 PC3-12800 rating combined with the 240-pin DIMM form factor. Your motherboard must support DDR3 at 1600 MT/s and accept 240-pin unbuffered non-ECC DIMMs with a 4 GB per slot limit. If the board calls for a different voltage, pin count, or memory standard, this kit will not be compatible.
Measured against everything we stock in Desktop RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SAMSUNG |
The kit uses 4 GB modules, so the board must accept at least 4 GB per slot; check the motherboard manual for the maximum capacity per DIMM.
All installed memory usually runs at the speed of the slowest module; the kit is rated at DDR3-1600 with CL11, so mixing slower sticks will drop the whole system to that lower speed.
Open the BIOS or a tool such as CPU-Z and verify the memory frequency shows 800 MHz (DDR3-1600) and the CAS latency reads 11.
More in Desktop RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?