SatelliteSale 5PACKTERMINATORS 75 OHM F Port Screw-on 5-2050Mhz 5 Pack wire cap connector

75 Ohm F-Port Terminators

These 75 ohm F-port screw-on terminators are designed for broadband coaxial systems that have unused ports on splitters or amplifiers. They provide a resistive dummy load to maintain proper impedance across the network. The pack contains five nickel-plated steel units suitable for commercial or residential installations. Installers use them to prevent signal reflections that cause ghosting on TV pictures.

Teflon Insulator and Steel Conductor

Each terminator features a Teflon insulator that isolates the load from the metal body for stable performance. A steel centre conductor with a 0.027 inch outer diameter resists bending during repeated connection cycles. The nickel plating extends environmental survivability in humid or outdoor locations. Return loss exceeds 25 dB across the 5 to 2050 MHz operational bandwidth.

Check Port Threading and Frequency Range

Verify that your splitter or amplifier uses standard F-type female threads before ordering. Confirm the system operates within the 5 to 2050 MHz range so the terminator's specified return loss applies. Open ports left unterminated can leak signals outward and interfere with radio communications. These caps address that compliance requirement.