We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow zinc enclosure with red mushroom emergency stop button, 30 mm, wall mount

Schneider Electric

Schneider Electric 9001KYG1Y1 30 mm Emergency Stop Station 1NC

SKU CH-7HRX-4Y5CM

A wall-mounted 30 mm emergency stop station with a red mushroom head, 1NC contact, IP66 and NEMA 4 zinc enclosure in yellow

  • Brand nameSCHNEIDER ELECTRIC
  • Engine size30 mm
  • Red mushroom head enables fast emergency shutdown
  • Maintained action stays latched until manually reset
  • 1NC contact rated 10A at 600V AC and 2.5A at 24V DC
  • IP66 and NEMA 4 enclosure resists dust and water ingress
  • Zinc housing with 3/4 in NPT hub suits wall mounting

Emergency Stop Station 30 mm

The Schneider Electric 9001KYG1Y1 is a wall-mount control station built for industrial safety circuits. A single red mushroom-head push button provides maintained emergency-stop action with one normally-closed contact.

Contact Rating 10A 600V AC

The 1NC contact handles 10 A at 600 V AC or 2.5 A at 24 V DC, meeting A600/Q600 designation. It suits standard three-phase motor starters and control relays but lacks the capacity for high-current direct motor switching.

IP66 Zinc Enclosure 3/4 NPT

The yellow zinc housing rated IP66 and NEMA 4 resists water jets and dust in wash-down environments. A 3/4 inch NPT hub allows rigid conduit entry, while the 30 mm operator cut-out matches standard panel layouts.

How it compares

Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.

Price $289.99
Pricier than about 90% of the 677 comparable items (median $33.99).

Specifications

Product
Brand nameSCHNEIDER ELECTRIC
Size & build
Engine size30 mm

Questions about this item

Will the 30 mm mushroom-head button fit the existing 30 mm panel cut-out on my older control panel?

Yes — the operator is a 30 mm push-button with mushroom head, matching the standard 30 mm mounting hole used on legacy panels.

How can I verify the 1NC contact opens correctly when I press the emergency-stop button?

With power off, measure continuity across the contact terminals; the circuit should be closed until the red mushroom head is pressed, then open and stay open until the head is twisted or pulled to reset.

Does the yellow zinc enclosure come with the 3/4 in NPT hub fitted, or must I supply my own conduit fitting?

The station includes a 3/4 in NPT hub already threaded into the zinc enclosure; no separate conduit fitting is required for wall mounting.

More in Bench & DC Power Supplies

Similar items