Schneider Electric 9001SKP38LGG9 green LED pilot light
Green LED pilot light with screw-clamp terminals, 30 mm domed polycarbonate lens, NEMA 1/2/3/3R/4/4X/6/12/13 and IP66 ratings for 120 V AC panels
- Color familyGreen
- Product typeLight Switch
- Size or dimensions30 mm
- Color and finishGreen
- Green LED pilot light for clear status indication
- 120 V AC full-voltage operation simplifies wiring
- IP66 and NEMA 4X ratings protect against dust and water jets
- 30 mm round domed lens fits standard panel cut-outs
- Screw-clamp terminals with included LED lamp enable quick installation
Green LED pilot light
This Schneider Electric 9001SKP38LGG9 pilot light uses a green LED lamp behind a domed polycarbonate lens. The 30 mm round unit mounts with screw-clamp terminals and carries NEMA 1, 2, 3, 3R, 4, 4X, 6, 12, 13 and IP66 ratings. It operates at 120 V AC and includes the light module and LED lamp in a single plastic body.
Replaces incandescent indicator lamps
The full-voltage LED module removes the need for separate lamp replacements and reduces heat compared with traditional incandescent pilot lights. The jump is worth it when a panel requires a visible status signal that survives wash-down, dust or outdoor exposure without relamping.
Panel-mount status indicator
The 30 mm cut-out fits standard push-button stations and control panels rated for NEMA 4X or IP66 environments. Screw-clamp terminals accept solid or stranded wire without special tooling. The green lens provides clear on/off or run indication while the sealed construction frees the enclosure from separate gasketing for the indicator.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $99.99
- Pricier than about 75% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | SCHNEIDER ELECTRIC |
| Product type | Light Switch |
| Color and finish | Green |
| Color family | Green |
| Size & build | |
| Size or dimensions | 30 mm |
Questions about this item
What panel cut-out size does the 30 mm Schneider Electric 9001SKP38LGG9 pilot light require?
The unit is built for a standard 30 mm mounting hole, so drill or punch a 30 mm diameter opening in the panel.
How is the 120 V AC LED module wired, and what terminal mistake should I avoid?
Connect the supply wires to the screw-clamp terminals and tighten each screw firmly; the common error is leaving a clamp loose, which causes flicker or heat.
When the green LED eventually dims, what part do I replace and how?
The lamp module is not separately replaceable; the specification lists replacement lamps as N/A, so the entire pilot light unit must be swapped out.
More in Electrical Switches & Dimmers
Similar items
Hubbell Incorporated GFSG5362I GFCI Receptacle 20A 125VAC 5-20R
- Ivory
- Wiring Devices
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Schneider Electric 9001KR9R 30 mm Red Push Button Operator
- Red
- Light Switch





