Schneider Electric 9001SKR1BH5 30mm non-illuminated push button
A 30 mm flush push button with momentary action, black plastic head, corrosion-resistant bezel and 10 A at 600 V AC contact rating, rated NEMA 1, 2, 3, 3R, 4, 4X, 6, 12, 13 and IP66
- Color familyBlack
- Product typeLight Switch
- Size or dimensions30 mm
- Color and finishBlack
- Momentary action gives precise on/off control
- 30 mm flush button fits standard panel cut-outs
- IP66 and NEMA 4X ratings protect against dust and water jets
- 10 A at 600 V AC contact rating handles industrial loads
- Corrosion-resistant thermoplastic bezel extends service life
Schneider Electric 30mm Push Button
The Schneider Electric 9001SKR1BH5 is a flush-mounted, non-illuminated push button operator with a 30mm diameter. It provides momentary action through a single normally-open contact rated at 10A and 600V AC. The black plastic head sits in a corrosion-resistant thermoplastic bezel. It meets NEMA ratings 1, 2, 3, 3R, 4, 4X, 6, 12, and 13, plus IP66 ingress protection.
Replaces worn or incompatible 30mm operators
This unit suits panels requiring a standard 30mm cutout and a momentary 1NO contact block. The jump is worth it when the existing device lacks the required NEMA or IP ratings for the environment, or when the contact rating must reach 600V AC. It conforms to UL 508, CSA C22.2 No. 14, and EN/IEC 60947 standards for industrial control circuits.
Suits industrial panels needing momentary 1NO
Installers wiring motor starters, relay logic, or similar 600V AC circuits will find the ratings and sealing match common specifications. Buyers who need a maintained-action switch, an illuminated head, a normally-closed contact, or a different mounting diameter should look at alternative operators. The single-operator format does not support multi-function stations.
How it compares
Measured against everything we stock in Electrical Switches & Dimmers, at today’s prices. Recalculated every night.
- Price $52.99
- Pricier than about 60% of the 791 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | SCHNEIDER ELECTRIC |
| Product type | Light Switch |
| Color and finish | Black |
| Color family | Black |
| Size & build | |
| Size or dimensions | 30 mm |
Questions about this item
What panel cut-out does the 30 mm push button need?
The operator requires a standard 30 mm mounting hole for flush installation in panels rated NEMA 1, 12, 13, 2, 3, 3R, 4, 4X or 6 and IP66.
How do I wire the 1NO contact block and what mistake should I avoid?
Connect the single normally-open contact to the load circuit; the common error is over-tightening the screw terminals, which can crack the thermoplastic bezel.
When should I replace the push button operator?
Replace the unit if the black plastic head shows cracking, the momentary action feels sticky, or the corrosion-resistant bezel no longer seals to IP66.
More in Electrical Switches & Dimmers
Similar items
Eaton HT8JDH3AA5 Selector Switch 2 Position 30mm Black
- Black
- Industrial Electric…
Leviton Manufacturing Co. 052-10097-008 pull chain switch
Schneider Electric ZB4BG4 22 mm 2-position keyed selector switch
- Black
- Industrial Electric…
Schneider Electric 9001KR3UH5 30 mm push button
- Universal
- Light Switch





