We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular IEC magnetic contactor with DIN rail mounting clips and terminal screws visible

Schneider Electric

Schneider Electric LC2D18B7V IEC Magnetic Contactor 24V AC 3P 1NO/1NC

SKU CH-7XPT-566BC

IEC magnetic contactor for motor control at 24V AC with 1NO/1NC auxiliary contacts, 18A inductive rating and 15 million mechanical cycles

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • Controls motors and resistive loads with 24 V AC coil
  • Auxiliary contacts 1NO/1NC for status signalling
  • Pre-assembled reversing busbar speeds installation
  • Wide temperature range −40 °F to 140 °F suits harsh sites
  • DIN-rail or plate mounting fits existing panels

Industrial Motor Control Contactor

The Schneider Electric LC2D18B7V is a three-pole IEC magnetic contactor built for motor control and resistive load circuits. It operates on a 24V AC coil and includes a 1NO/1NC auxiliary contact block. The unit arrives preassembled with a reversing power busbar and a protective cover, suited for panel builders and maintenance teams wiring motor starters.

Current Ratings and Durability

The contactor carries 18 A full-load inductive current and 32 A resistive current with a maximum voltage rating of 690V AC. Electrical durability reaches 1.65 million cycles at 18 A in AC-3 duty and 1 million cycles at 32 A in AC-1 duty, both below 440 V. Mechanical life is rated at 15 million cycles, giving long service in frequent-start applications.

Voltage, Temperature and Mounting Limits

Rated insulation voltage is 600/690 V and the coil runs on 50/60 Hz. Operating temperature spans from -40 °F to 140 °F, allowing use in unheated industrial environments. The open-frame design carries an IP20 rating, so it must be installed inside a suitable enclosure. Mounting options are DIN rail or plate, with no integral surge suppressor provided.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $355.99
Pricier than about 90% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameSCHNEIDER ELECTRIC
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

Will the 24 V AC coil work with my existing 50/60 Hz control transformer?

Yes, the coil is rated for 50/60 Hz operation, so it will function correctly with a standard 24 V AC control transformer running at either frequency.

How can I confirm the contactor is operating correctly once installed?

Apply 24 V AC to the coil; the main power poles should close and the auxiliary 1NO contact should close while the 1NC contact opens, which can be verified with a multimeter.

Does the box include a DIN rail clip or must I order one separately?

The unit is designed for DIN rail or plate mounting and ships preassembled with a reversing power busbar and protective cover; no separate mounting clip is required.

More in AV Accessories & Components

Similar items