We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent miniature magnetic contactor with screw clamp terminals, DIN rail mounting, 3 pole, 1NC auxiliary contact

Schneider Electric

Schneider Electric LC2K0901F7 IEC Miniature Magnetic Contactor 1NC 120V AC 3 Pole

SKU CH-ASNE-XA20S

IEC miniature magnetic contactor with 1NC auxiliary contact, 3-pole reversing operation, 110 V AC coil, 9 A inductive and 20 A resistive ratings, DIN-rail or plate mounting, screw-clamp terminals

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • Miniature IEC contactor fits tight DIN-rail spaces
  • 120 V AC coil voltage matches common control circuits
  • 3-pole main contacts switch three-phase loads
  • 9 A inductive / 20 A resistive ratings cover motor and heater circuits
  • 1 NC auxiliary contact provides status feedback to PLCs

Schneider Electric IEC Miniature Contactor

The Schneider Electric LC2K0901F7 is a miniature IEC magnetic contactor designed for industrial control and automation tasks. It features a 3-pole configuration with a 1NC auxiliary contact and operates on a 110V AC coil voltage. The unit mounts on DIN rail or plate using screw clamp terminals for secure wiring connections.

For Motor Control Circuits Requiring Reversing

This contactor suits panels needing a compact reversing starter with a 9 A inductive and 20 A resistive current rating. It is not for applications requiring a built-in NEMA-rated enclosure or contact arrangements beyond the single normally closed auxiliary contact provided. Buyers needing higher pole counts or different coil voltages must select another model.

110V AC Coil Voltage Determines Compatibility

The coil voltage of 110V AC is the critical specification that dictates whether this contactor integrates with your control circuit. Verify your control supply matches this rating exactly before installation. The TeSys K series dimensions of 2.28 in height and 3.54 in width define the panel space required.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $143.99
Pricier than about 82% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameSCHNEIDER ELECTRIC
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

Should I choose the 9 A inductive or the 20 A resistive rating for my load?

Use the 9 A inductive rating for motors, solenoids or transformers; the 20 A resistive figure only applies to heaters or incandescent loads.

What does the 110 V AC coil voltage mean once the contactor is wired in my panel?

The coil will pull in and hold reliably at 110 V AC; at 120 V AC it still operates within the standard tolerance band for this series.

How does the screw-clamp terminal interface limit the wire size I can connect?

Screw-clamp terminals accept solid or stranded conductors up to the cross-section specified in the TeSys K datasheet; strip length and tightening torque follow that same standard.

More in AV Accessories & Components

Similar items