Schneider Electric M9F21125 C60SP 25A 1-pole load center
A 25 A single-pole miniature circuit breaker rated for 240/415 V AC and 60 V DC with a 14 kA interrupting capacity at 120/240 V AC
- 25 A branch-circuit protection with 14 kA interrupting capacity
- B-curve thermal-magnetic trip for precise overload response
- Single-pole DIN-rail mount fits 18–8 AWG conductors
- UL 1077 supplementary protector rated 240/415 V AC and 60 V DC
- Compact 3.19 × 0.71 × 2.83 in footprint saves panel space
Application scope
This Schneider Electric C60SP 25 A miniature circuit breaker provides single-pole branch-circuit protection for 1-phase AC systems up to 240/415 V and DC circuits up to 60 V. It suits panels where a 14 kA interrupting rating at 120/240 V AC meets the required short-circuit withstand.
Installation requirements
The device mounts on standard DIN rail and accepts conductors from 18 AWG to 8 AWG via screw-clamp terminals. Its 1-pole, 25 A thermal-magnetic trip unit frees the designer from specifying separate overload and short-circuit devices for the protected circuit.
Compliance and form factor
UL 1077 listing confirms suitability as a supplementary protector in certified assemblies. The compact 3.19 in by 0.71 in by 2.83 in profile allows dense rail population without exceeding the stated dimensional envelope.
How it compares
Measured against everything we stock in Breaker Panels & Circuit Protection, at today’s prices. Recalculated every night.
- Price $61.99
- Cheaper than about 79% of the 25 comparable items (median $114.99).
Specifications
| Product | |
|---|---|
| Brand name | SCHNEIDER ELECTRIC |
Questions about this item
What is the maximum prospective short-circuit current this 25 A C60SP breaker can safely interrupt at 120/240 V AC?
The breaker has a maximum AIR rating of 14 kA at 120/240 V AC.
How much heat does the thermal-magnetic trip unit generate during continuous 25 A operation?
Continuous operation at the rated 25 A produces typical thermal-magnetic breaker heat rise; ensure the DIN rail enclosure has adequate ventilation.
What wire gauges can be terminated in the screw-clamp terminals?
The terminals accept solid or stranded copper from 18 AWG up to 8 AWG.
More in Breaker Panels & Circuit Protection





