Schneider Electric NSYTRV62 Pass-Through Terminal Block 1 Pole 50 A 1000 V

Single-Pole Pass-Through Block

The Schneider Electric NSYTRV62 is a DIN-rail terminal block rated for 50 A and 1000 V. It accepts solid or stranded copper wire from 24 AWG up to 8 AWG using screw-clamp connections. The grey, two-tier housing measures 1.88 in deep, 1.88 in long and 0.32 in wide, making it suitable for compact control-panel layouts. Certified to ATEX, CSA, CURus, DNV, GL, IECEx, LR, UL and VDE standards.

50 A Current Rating Decides Fit

The 50 A rating is the single figure that determines whether this block matches your circuit. Conductors must be copper and fall between 24 AWG and 8 AWG; exceeding either limit voids the rating. No circuit-protection function is built in, so over-current devices must be provided elsewhere in the panel.

DIN-Rail Mount Frees Panel Space

The block snaps onto standard DIN rail, leaving the panel surface clear for other components. Screw-clamp terminals speed wiring without specialised tools. The pass-through design carries the conductor straight through both tiers, simplifying loop-through connections. Installers needing multi-pole or fused variants must select different part numbers.