Schneider Electric RXM2AB2P7 Relay DPDT 12 A 230 V AC 8 Pin
A plug-in DPDT relay rated 12 A at 230 V AC with LED indicator, lockable push-to-test and 8 flat pins
- Product typeIndustrial Electrical Controls & Automation
- Product colorTransparent
- DPDT switching handles two circuits simultaneously
- 12 A rating supports up to 250 V AC loads
- 230 V AC coil fits standard control panels
- LED indicator and mechanical flag show status instantly
- Plug-in 8-pin base enables quick installation
Plug-in relay for 230 V AC control circuits
The Schneider Electric RXM2AB2P7 is a square-base general-purpose relay rated at 12 A with a DPDT contact form. It suits industrial automation panels, lighting control and motor-starter circuits where a 230 V AC coil drives plug-in switching.
Verify coil voltage and socket pinout before
Your panel must supply 230 V AC to the coil and accept an 8-pin flat-pin plug-in base with 0.09 in pin width. The enclosure is sealed and the relay body measures 1.57 in deep by 1.06 in high, so confirm the socket cut-out and wiring clearance match these dimensions.
LED indicator and lockable push-to-test aid
A built-in LED shows coil status at a glance while the mechanical flag and lockable push-to-test button let technicians verify contact operation without removing the relay. Contacts are rated 12 A at 250 V AC and 12 A at 28 V DC for resistive loads.
How it compares
Measured against everything we stock in Solenoid & Power Relays, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 93% of the 125 comparable items (median $26.99).
Specifications
| Product | |
|---|---|
| Brand name | SCHNEIDER ELECTRIC |
| Product type | Industrial Electrical Controls & Automation |
| Product color | Transparent |
Questions about this item
Does the RXM2AB2P7 relay include a socket or must I buy the 8-pin base separately?
The relay has eight flat pins for plug-in mounting; a compatible socket is not included and must be purchased separately.
How do I choose between the 12 A 250 V AC rating and the 12 A 28 V DC rating for my circuit?
Use the 12 A 250 V AC rating for alternating-current loads up to 250 V and the 12 A 28 V DC rating for direct-current loads up to 28 V.
What does the 230 V AC coil voltage mean when the relay is installed in a control panel?
The coil requires a 230 V AC supply to operate; once energised the DPDT contacts switch up to 12 A at 250 V AC or 28 V DC.
More in Solenoid & Power Relays
Similar items
Schneider Electric RPM22F7 Relay 120V AC 15A DPDT 8-Pin
- Miniature Power, LE…
- Transparent
Schneider Electric RXM2AB2B7 Relay 24V AC 12 A 8 Pin
- Industrial Electric…
- Transparent
Dayton 1EHD6 Plug-In Relay 240V AC 15 A 5-Pin Square
- Industrial Electric…
- Transparent





