We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey plastic control station with three push buttons, two green and one red, 22 mm size

Schneider Electric

Schneider Electric XALD321H29H7 Control Station 3 Buttons Green Red 22 mm

SKU CH-XBP7-9D7X1

Industrial control station with three 22 mm momentary push buttons in green and red, rated IP66, IP67, IP69 and IP69K with NEMA 13 and 4X enclosure

  • Size22 mm
  • Product typeIndustrial Electrical Controls & Automation
  • Three momentary push buttons for direct machine control
  • Green and red operators give clear visual status at a glance
  • 10 A at 600 V AC rating handles heavy industrial loads
  • IP66 IP67 IP69 IP69K enclosure resists water jets and high-pressure washdown
  • NEMA 13 4X rating certifies protection against oil, dust and corrosion

Control station with three momentary push buttons

This Schneider Electric XALD321H29H7 control station provides three 22 mm push-button operators in a plastic enclosure. Two operators are green and one is red, each delivering momentary action for start, stop or directional control. The unit carries NEMA 13, 4X and IP66, IP67, IP69, IP69K ratings for harsh industrial environments. It is suited for machine panels that need a compact, sealed operator cluster.

Contact configuration 2NO

The station uses a 2NO/1NC contact form rated at 10 A @ 600 V AC and 2.5 A @ 24 V DC with NEMA A600/Q600 designation. This specific arrangement determines whether the station matches the control circuit logic and load requirements of the application. Verify the contact count and ratings against the wiring diagram before specifying this part.

Sealed enclosure maintains ratings during

The plastic housing preserves NEMA and IP protection while the momentary buttons are held or cycled repeatedly under load. Contacts remain within their 10 A AC and 2.5 A DC ratings during sustained actuation, and the mechanical interlock is absent to allow independent button operation. Performance stays consistent as long as the applied voltage and current remain within the published contact ratings.

How it compares

Measured against everything we stock in General Hardware & Accessories, at today’s prices. Recalculated every night.

Price $93.99
Pricier than about 84% of the 2,607 comparable items (median $18.99).

Specifications

Product
Brand nameSCHNEIDER ELECTRIC
Product typeIndustrial Electrical Controls & Automation
Size & build
Size22 mm

Questions about this item

What does the 10 A / 600 V AC contact rating mean when the station is wired into a control circuit?

Each contact block can switch up to 10 A at 600 V AC, matching the A600 designation, so the station can directly pilot motor starters or contactors in standard industrial control circuits.

How do the NEMA 13, 4X and IP66 / IP67 / IP69 / IP69K ratings limit where the station can be mounted?

The enclosure resists oil, coolant, dust, high-pressure washdown and temporary immersion, allowing installation on machines that are regularly cleaned with hot, high-pressure jets in food or process environments.

What cut-out and depth are needed to fit the 22 mm operators in a panel or enclosure?

Each operator requires a standard 22 mm mounting hole; the assembled station is 2.68 in wide and 5.27 in deep, so allow that footprint plus wiring space behind the panel.

More in General Hardware & Accessories

Similar items