Schneider Electric XAPG59505 pushbutton enclosure 12.2 in 5 holes NEMA 13 4

Schneider Electric XAPG59505 pushbutton enclosure

This Schneider Electric XAPG59505 pushbutton enclosure is an industrial control housing designed for operators who need a compact, wall-mounted station. It provides five 22 mm cutouts arranged in a single vertical column for pushbuttons, selector switches or pilot lights. The die-cast aluminium body carries a NEMA 13 and 4 rating for protection against dust, oil and water ingress. Grey finish suits standard factory colour schemes.

Five-hole capacity and NEMA 13 4 headroom

Five 22 mm holes give room for a typical start-stop, emergency-stop and indicator-light cluster on a single panel. The 12.2 in height and 3.35 in width keep the footprint narrow for tight machine frames. Internal depth of 3.03 in and a contact-block depth of 2.93 in limit the length of rear-mounted components, so long-travel blocks or thick terminal strips may not fit. The 3/4 in conduit entry handles standard wiring but restricts cable-count or gland size.

NEMA 13 4 and 3/4 in conduit practical limits

NEMA 13 and 4 ratings cover indoor oil, coolant and wash-down environments but do not address corrosive atmospheres or hazardous-location requirements. The single 3/4 in conduit opening forces all cables through one raceway, which can complicate separation of power and signal circuits. Vertical mounting style fixes the enclosure orientation, so horizontal runs or angled operator stations need a different housing. RoHS compliance confirms restricted-substance adherence for regulated markets.