We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Schneider Electric ZB5AZ1014 contact block, black plastic body, 22 mm diameter, single normally open circuit, plug-in terminals

Schneider Electric

Schneider Electric ZB5AZ1014 Contact Block 22 mm Black 1NO

SKU CH-FZ1G-ZB2Y1

A 22 mm black contact block with one normally open circuit rated at 10 A, 250 V AC for Schneider ZB4 metal operators

  • Size22 mm
  • Product typeIndustrial Electrical Controls & Automation
  • 1NO momentary contact for reliable switching
  • 10 A at 250 V AC rating handles demanding loads
  • 22 mm mounting fits standard operator cut-outs
  • Plug-in terminals speed up panel wiring
  • Meets IEC 60947 and UL 508 standards

Industrial Contact Block

The Schneider Electric ZB5AZ1014 is a 22 mm industrial contact block designed for automation and control panels. It provides a single normally open circuit for momentary operator functions. The plug-in terminal connection allows quick installation on compatible Schneider ZB4 metal operators. This component suits engineers building or maintaining IEC-rated control systems.

Ratings and Standards

The block carries a 10 A rating at 250 V AC and meets NEMA A300/R300 designations. It complies with CSA C22.2 No. 14, IEC 60947-1, IEC 60947-5-1, IEC 60947-5-4, JIS C8201-1, JIS C8201-5-1 and UL 508. These certifications confirm suitability for demanding industrial environments without requiring additional derating.

Sustained Operation

Under continuous load the contact maintains its rated 10 A capacity within the 250 V AC limit. The momentary action ensures the circuit closes only while the operator is actuated, reducing heat build-up during extended duty cycles. Plug-in terminals stay secure under vibration, supporting reliable performance in panels that run for long periods without interruption.

How it compares

Measured against everything we stock in General Hardware & Accessories, at today’s prices. Recalculated every night.

Price $18.99
Typical for this category: the median of 2,607 items is $18.99.

Specifications

Product
Brand nameSCHNEIDER ELECTRIC
Product typeIndustrial Electrical Controls & Automation
Size & build
Size22 mm

Questions about this item

How do I install the ZB5AZ1014 contact block into a 22 mm panel cut-out, and which step do installers often miss?

Snap the block onto the back of a compatible ZB4 metal operator until the plug-in connector latches; the step often missed is verifying the latch clicks fully so the 1NO circuit makes reliable contact.

What maintenance or replacement will the ZB5AZ1014 contact block need after extended service?

The block itself is sealed and requires no routine maintenance; replace the entire unit if the 10 A / 250 V AC contacts show wear or fail to meet the A300/R300 rating during periodic insulation-resistance checks.

What is the first electrical limit reached when the ZB5AZ1014 runs continuously at full load?

The 10 A continuous current rating at 250 V AC is the limiting factor; sustained operation above this value will cause contact overheating before any mechanical endurance limit is reached.

More in General Hardware & Accessories

Similar items