Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 74 GB, 10,000 RPM SCSI Ultra320 drive with 8 MB cache and 4.7 ms seek time for high-performance servers
The Seagate Cheetah ST373307LW is a 74GB 3.5 inch internal hard drive that spins at 10000 RPM with an 8MB cache. It connects through a SCSI Ultra320 68pin interface and has a low-profile height of 1.0 inch. The bare drive is supplied new without retail packaging.
This drive suits administrators maintaining or expanding Ultra320 SCSI arrays in rackmount servers or workstations that already use 68pin backplanes. Builders whose motherboards lack a native SCSI controller or who need larger capacities for modern workloads should look at something else.
The single specification that decides fit is the 68pin SCSI Ultra320 interface; the drive will only operate in systems equipped with a matching host adapter and backplane.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Cheetah |
| Model name | ST373307LW |
| Total capacity | 74 GB |
| Performance | |
| Rotational speed | 10,000 RPM |
| Average seek time | 4.7 ms |
| Mean write time | 5.2 ms |
| Mean latency | 2.99 ms |
| Storage | |
| Cache memory | 8 MB |
| Ports & slots | |
| Interface type | SCSI Ultra320 68pin |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.68 kg |
| Package size | 147 × 102 × 25 mm |
The drive uses a standard 68-pin SCSI Ultra320 interface; verify that your backplane or controller provides the same 68-pin connector and Ultra320 signalling.
Many builders forget to set the SCSI ID jumpers and enable termination on the last device; incorrect IDs or missing termination will prevent the drive from being detected.
The 3D Defense System protects the spindle bearings and heads from shock and vibration; no routine bearing checks or lubrication are required during the drive's service life.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?