Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
High-capacity 28 TB enterprise hard drive with 7200 RPM, 512 MB cache and SATA 6.0 Gb/s interface for hyperscale storage
The Seagate Exos X 28TB is a 3.5-inch internal hard drive built for enterprise NAS and hyperscale storage. It spins at 7200 RPM with a 512MB cache and uses a SATA 6.0Gb/s interface. The helium-sealed design supports 28TB capacity in a standard form factor.
The drive connects through a SATA 6.0Gb/s link, so maximum throughput cannot exceed that bus speed. Average latency is 4.16ms at 7200 RPM. Sustained transfer rates will be bounded by the SATA interface rather than the drive media.
Verify your chassis has a 3.5-inch bay with at least 26.10mm height, 101.85mm width and 147.00mm length clearance. Ensure the power supply delivers sufficient 12V and 5V current for a 7200 RPM helium drive. Confirm the motherboard or controller provides a SATA 6.0Gb/s port.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Exos |
| Model name | ST28000NM000C |
| Part number | ST28000NM000C |
| Total capacity | 28 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 512 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.45 kg |
| Package size | 254 × 178 × 76 mm |
The ST28000NM000C provides 28TB in a single 3.5-inch drive, letting you reach multiple petabytes per rack with fewer bays than lower-capacity models.
At 7200 RPM with 4.16ms average latency and a 512MB cache, the drive sustains the high sequential speeds needed for large-file workloads such as backup, media ingest, and distributed file systems.
The SATA 6.0Gb/s link caps the theoretical maximum at 6.0Gb/s, so sustained reads and writes will top out below that ceiling once protocol overhead and drive mechanics are accounted for.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?