Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
14 TB enterprise SATA drive with 7200 RPM, 256 MB cache and 2.5M-hour MTBF for high-capacity storage
This 14TB 3.5-inch enterprise hard drive uses a SATA 6.0Gb/s interface and spins at 7200 RPM with a 256MB cache. It is built for nearline storage in servers and arrays where high capacity and consistent response rates are required. The helium-filled design helps lower power consumption per terabyte in dense deployments.
It suits integrators building maximum-density racks that can accommodate the 25.4mm height and need a 550TB per year workload rating with a 2.5M-hour MTBF. It is not for desktop workloads that exceed the annual transfer limit or for bays that cannot accept a 3.5-inch form factor.
The 550TB per year workload rate limit is the single figure that determines whether this drive matches the intended write intensity. Exceeding that threshold risks reduced reliability and falls outside the design envelope.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Exos X16 |
| Model name | ST14000NM005G |
| Total capacity | 14 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 25.4 mm |
| Maximum width | 101.6 mm |
| Maximum length | 147.32 mm |
Yes. The drive measures 25.4 mm high, 101.6 mm wide and 147.32 mm long, matching the standard 3.5-inch form factor used in most server and desktop bays.
No. Connect a standard SATA data cable and a SATA power connector; the drive has no jumpers and negotiates the 6.0Gb/s link automatically.
The drive is rated for 550TB per year with a 2.5M-hour MTBF; plan a capacity review once annual writes approach that limit.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?