Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Enterprise 12 TB hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface
The Seagate Exos X18 ST12000NM000J is a 12TB 3.5-inch hard drive built for enterprise storage workloads. It spins at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. Helium-sealed construction and PowerBalance technology optimise watts per terabyte for large-scale deployments. Digital environmental sensors monitor internal conditions for consistent operation.
This drive targets cloud data centres and massive scale-out environments that prioritise capacity density and total cost of ownership. Buyers who need the 18TB maximum capacity mentioned in the series highlights should look at a higher-capacity model. Systems requiring a different interface or a smaller form factor cannot use this SATA 3.5-inch unit.
The drive communicates over SATA 6.0Gb/s, so the host must provide a compatible SATA port and supporting backplane. Average latency is 4.16ms at 7200 RPM. Physical dimensions are 147.00mm length, 101.85mm width and 26.10mm height for standard 3.5-inch bay planning.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Exos X18 |
| Model name | ST12000NM000J |
| Total capacity | 12 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Flash memory type | Hard Drive |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.68 kg |
| Package size | 152 × 102 × 25 mm |
Yes, the drive uses a standard SATA 6.0Gb/s data connector and requires a 3.5" bay with a SATA power connector; the 26.10mm height fits typical desktop cages.
The SATA 6.0Gb/s interface is backward compatible, so the 12TB drive will operate at the 3.0Gb/s link speed on older controllers.
Check SMART data for zero reallocated sectors, confirm the firmware reports 12TB capacity and 256MB cache, and listen for steady 7200 RPM operation without unusual noise.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?