We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5-inch bare hard drive with exposed circuit board and SATA connectors

Seagate

Seagate IronWolf Pro 10TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" ST10000NE0004

SKU CH-ZDRH-R7K7D MPN ST10000NE0004

A 10 TB 3.5" SATA desktop drive built for 24/7 NAS workloads with 7200 RPM, 256 MB cache and AgileArray RAID optimisation

  • Total capacity10 TB
  • Interface typeSATA 6.0Gb/s
  • Form factor3.5 in (8.89 cm)
  • Packaging typeBare Drive
  • Rotational speed7,200 RPM
  • Cache memory256 MB
  • Built for 24x7 NAS workloads with 300TB/year rating
  • AgileArray enables dual-plane balancing and RAID optimisation
  • IronWolf Health Management actively monitors drive condition
  • 2-year Rescue Data Recovery with 90% in-house success
  • 2M hours MTBF and 7200 RPM performance

10TB NAS drive for multi-bay arrays

The Seagate IronWolf Pro ST10000NE0004 is a 10TB 3.5 inch hard drive built for always-on network attached storage. It spins at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. AgileArray firmware adds dual-plane balancing and RAID optimisation for multi-bay enclosures.

Suited for 24/7 NAS workloads up to 300TB per year

This drive targets users who need continuous operation in 1 to 16 bay systems with rotational vibration sensors and IronWolf Health Management. It is not for buyers who want a desktop drive without NAS tuning, nor for systems that require a 2.5 inch form factor or an interface other than SATA.

300TB annual workload rating defines endurance

The 300TB per year workload rate is the key figure that determines whether this drive matches the write intensity of the planned NAS deployment. A 1.2 million hour MTBF and bundled Rescue Data Recovery service support long-term reliability in RAID environments.

How it compares

Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.

Price $266.99
Pricier than about 79% of the 4,938 comparable items (median $107.99).
Total capacity 10 TB
Higher than about 85% of the 2,372 comparable items (median 2 TB).
Price per TB $26.70 per TB
Cheaper than about 87% of the 2,365 comparable items (median $62.21 per TB).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameSeagate
Product lineIronWolf Pro
Model nameST10000NE0004
Total capacity10 TB
Recommended useEnterprise NAS Hard Drives
Performance
Rotational speed7,200 RPM
Mean latency4.16 ms
Storage
Cache memory256 MB
Ports & slots
Interface typeSATA 6.0Gb/s
Size & build
Form factor3.5 in (8.89 cm)
Max height26.11 mm
Maximum width101.85 mm
Maximum length146.99 mm
Shipping weight0.64 kg
Package size161 × 130 × 36 mm

Questions about this item

What does the SATA 6.0Gb/s interface limit in practice?

The SATA 6.0Gb/s link caps the maximum theoretical throughput at 6.0 Gb/s, which is the ceiling for both burst and sustained transfers on this drive.

What are the exact dimensions I need to clear for a 3.5-inch bay?

The drive measures 146.99 mm long, 101.85 mm wide and 26.11 mm high, so the bay and any caddy must accommodate those maximums.

Which step is most often missed when installing this bare drive into a NAS enclosure?

Many installers forget to enable AgileArray in the NAS firmware after slotting the drive, so dual-plane balancing and RAID optimisation remain inactive.

More in 3.5-Inch Internal Desktop HDDs

Similar items