Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8TB 3.5-inch drive built for 24×7 NAS workloads with 7200 RPM speed, 256MB cache and AgileArray RAID optimisation
The Seagate IronWolf Pro ST8000NE0004 is an 8 TB 3.5" internal hard drive built for multi-bay NAS enclosures. It runs at 7200 RPM with a 256 MB cache and a SATA 6.0 Gb/s interface. AgileArray firmware adds dual-plane balancing and RAID optimisation for always-on 24x7 workloads.
Rotational vibration sensors help maintain steady performance across up to 16 bays without excess vibration-induced heat. The drive sustains a 300 TB per year workload rate while the advanced power management keeps draw predictable during continuous use. Average latency sits at 4.16 ms.
IronWolf Health Management actively monitors drive health and reports status through compatible NAS operating systems. The box includes a two-year Seagate Rescue Data Recovery plan with a 90 percent in-house success rate covering mechanical, accidental or natural disaster events.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | IronWolf Pro |
| Model name | ST8000NE0004 |
| Total capacity | 8 TB |
| Recommended use | Enterprise NAS Hard Drives |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.11 mm |
| Maximum width | 101.85 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.64 kg |
| Package size | 161 × 141 × 36 mm |
Mount the drive using the 101.85mm width and 146.99mm length screw holes, connect the SATA data and power cables, then enable AgileArray dual-plane balancing in the NAS firmware — the balancing step is frequently skipped.
The drive includes Seagate Rescue Data Recovery for 2 years with a 90% in-house success rate; after that period, plan for a replacement drive once the 300TB/year workload rating or 1.2M hours MTBF threshold is reached.
The 300TB per year workload rate is the first ceiling you will hit under continuous multi-bay NAS use, before the 1.2M hours MTBF or the 5-year warranty period becomes the limiting factor.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?