Seagate ST250DM000 250GB 16MB SATA 6.0Gb/s 3.5" internal hard drive
- 250 GB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 3.5-inch desktop hard drive with SATA 6.0 Gb/s interface and 64 MB cache
Capacity 1TB
The Seagate ST1000DM003 is a 3.5" internal hard drive with 1TB capacity, 64MB cache and a SATA 6.0Gb/s interface. It suits desktop PCs, all-in-one systems, home servers and entry-level direct-attached storage where large, affordable capacity matters more than peak speed.
Seagate AcuTrac servo technology helps maintain consistent tracking during long read and write sessions. The drive uses up to 1.33TB-per-disk technology and delivers an average latency rated at 6Gb/s, so extended file transfers or backup jobs run steadily without the sharp drops seen in burst-only benchmarks.
The bare drive measures 146.99mm long, 101.60mm wide and 19.99mm high, fitting any standard 3.5" bay with SATA data and power cables. Units are supplied erased to DoD 5220.22 M standard, unformatted and unpartitioned, so the OS must initialise them; up to 25 bad sectors may be present and cosmetic label variations can occur.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Desktop HDD |
| Model name | ST1000DM003 |
| Total capacity | 1 TB |
| Performance | |
| Mean latency | 6Gb/s |
| Storage | |
| Cache memory | 64 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 19.99 mm |
| Maximum width | 101.6 mm |
| Maximum length | 146.99 mm |
| Shipping weight | 0.54 kg |
| Package size | 152 × 102 × 51 mm |
Other versions of this model
The 3.5-inch Desktop HDD runs on standard SATA power; idle draw is low and typical for a 1 TB drive, so a normal desktop PSU handles it without extra cables.
You need a free 3.5-inch bay, a SATA data cable, and a SATA power connector from the power supply; the drive ships without cables or brackets.
Yes, the interface is backward compatible and will run at the slower 3Gb/s speed, so older motherboards or controllers can still use the 1 TB capacity.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?