Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Enterprise 18 TB SAS drive with 7200 RPM, 256 MB cache and CMR recording for high-capacity storage arrays
The Seagate Exos X20 ST18000NM000D is an 18TB 3.5-inch internal hard drive built for enterprise storage arrays. It runs at 7200 RPM with a 256MB cache and uses conventional magnetic recording technology. The SAS 12Gb/s interface supports high-throughput workloads in rack-mounted systems.
This drive targets cloud data centres and massive scale-out deployments that need maximum petabytes per rack. Its helium-sealed design and PowerBalance feature optimise watts per terabyte for lower operating costs. Buyers who need a SATA interface or a non-enterprise drive for desktop or small-business NAS should look at other models.
The single specification that decides fit is the SAS 12Gb/s interface, which requires a compatible controller or backplane. Without SAS infrastructure the drive cannot be used, so verify your host bus adapter and enclosure support before purchase.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Exos X20 |
| Model name | ST18000NM000D |
| Total capacity | 18 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Recording method | CMR |
| Cache memory | 256 MB |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.91 kg |
| Package size | 196 × 152 × 76 mm |
The SAS 12Gb/s interface caps the theoretical maximum transfer rate at 12 gigabits per second, with actual sustained throughput limited by the 7200 RPM mechanics and 256MB cache.
The drive measures 147.00mm long, 101.85mm wide and 26.10mm high, fitting a standard 3.5-inch drive bay with bottom and side mounting points.
Connect the SAS data and power cables, secure the drive with four screws in the chassis bay, then configure the drive in the RAID controller or HBA BIOS so the operating system can see the 18TB volume.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?