Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 3.5-inch desktop drive spinning at 5900 RPM with 32 MB cache and a SATA 3.0Gb/s interface
The Seagate BarraCuda LP ST31000520AS is a 3.5 inch internal hard drive with 1 TB capacity, 5900 RPM spindle speed and 32 MB cache. It connects over a SATA 3.0 Gb/s interface and is supplied as a bare drive. The low-power design targets desktop systems that prioritise reduced energy draw over peak throughput.
The drive consumes up to 50 percent less power than standard desktop models, which lowers heat output and can reduce component stress over time. Average latency is 5.1 ms at the rated spindle speed. The unit has been erased to DoD 5220.22 M compliance and tested functional; up to 25 bad sectors may be present.
This drive replaces lower-capacity desktop disks or higher-power units where a cooler, quieter 1 TB volume is preferred. The jump is worthwhile when the system can accept a SATA 3.0 Gb/s device and does not require the faster access times of solid-state storage. It is not suited for workloads demanding sustained high transfer rates or enterprise-grade reliability.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | BarraCuda LP |
| Model name | ST31000520AS |
| Total capacity | 1 TB |
| Performance | |
| Rotational speed | 5,900 RPM |
| Mean latency | 5.1 ms |
| Storage | |
| Cache memory | 32 MB |
| Ports & slots | |
| Interface type | SATA 3.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.64 kg |
| Package size | 148 × 103 × 27 mm |
Mount the 3.5" drive in a bay, attach a SATA data cable to the motherboard and a SATA power connector from the PSU, then initialise and format the 1TB volume in Disk Management — the step often missed is creating the partition and file system after the drive appears in BIOS.
As a mechanical drive, the ST31000520AS may develop bad sectors over time; the supplier notes up to 25 bad sectors can be present on used units, so monitor SMART health and replace the drive if reallocated sector counts rise.
The 5900 RPM spindle speed and 5.1ms average latency set the sustained throughput ceiling, so long sequential workloads will hit the mechanical transfer limit before the SATA 3.0Gb/s interface saturates.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?