Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
300 GB enterprise hard drive spins at 10000 RPM with 8 MB cache and 2 Gbit/sec Fibre Channel interface for high-duty-cycle storage
The Seagate Cheetah 10K.7 ST3300007FC is a 300GB 3.5-inch internal hard drive spinning at 10000 RPM with an 8MB cache. It connects through a 2 Gbit/sec Fibre Channel interface and is supplied as a bare drive. The unit is designed for full duty cycle enterprise storage workloads where consistent throughput and reliability are primary requirements.
This drive fits administrators maintaining or expanding legacy Fibre Channel arrays that specifically require a 2 Gbit/sec 3.5-inch form factor. It is not for systems that lack a native Fibre Channel host bus adapter or backplane, nor for workloads needing larger capacities or interfaces other than the stated Fibre Channel link.
The 2 Gbit/sec Fibre Channel interface is the single determinant; the drive will only operate in enclosures or controllers that provide this exact connection. Without a compatible Fibre Channel infrastructure the drive cannot be used, regardless of its 10000 RPM speed or 300GB capacity.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Cheetah 10K.7 |
| Model name | ST3300007FC |
| Total capacity | 300 GB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 10,000 RPM |
| Average seek time | 4.7 ms |
| Mean write time | 5.3 ms |
| Mean latency | 3 ms |
| Storage | |
| Cache memory | 8 MB |
| Ports & slots | |
| Interface type | 2 Gbit/sec Fibre Channel |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 25.4 mm |
| Maximum width | 101.6 mm |
| Maximum length | 146.05 mm |
| Shipping weight | 0.82 kg |
| Package size | 152 × 102 × 25 mm |
The drive has an average latency of 3ms, which determines the rotational delay during continuous read or write operations.
The drive is specified for low power and cooling requirements in a 1.0 inch high 3.5 inch form factor.
A compatible 2 Gbit/sec Fibre Channel host bus adapter or RAID controller is required to connect this drive.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?