Seagate ST500DM009 500GB 7200 RPM 32MB SATA 6.0Gb/s 3.5" internal hard drive
- 500 GB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Seagate Refurbished
An 80 GB IDE desktop drive spinning at 7200 RPM with 2 MB cache, supplied as a bare 3.5" unit
This is a refurbished Seagate DB35 Series 7200.3 internal hard drive with an 80 GB capacity. It uses a 3.5 inch form factor and connects via an IDE Ultra ATA100 / ATA-6 interface. The drive spins at 7200 RPM and includes a 2 MB cache. It is intended for desktop systems that require a legacy parallel ATA storage device.
This drive suits technicians repairing or maintaining older desktop computers equipped with IDE controllers. It is not for builders assembling modern systems that lack IDE ports, nor for users who need higher capacities or solid-state performance. The bare drive packaging means no cables or mounting hardware are included.
The single specification that determines compatibility is the IDE Ultra ATA100 / ATA-6 interface. Your motherboard or controller card must provide a matching 40-pin IDE connector and support the ATA-6 protocol. Without that specific legacy interface, this drive cannot be installed or used.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | DB35 Series 7200.3 |
| Model name | ST380215ACE |
| Total capacity | 80 GB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Flash memory type | SLC |
| Cache memory | 2 MB |
| Ports & slots | |
| Interface type | IDE Ultra ATA100 / ATA-6 |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 0.36 kg |
| Package size | 142 × 102 × 20 mm |
Yes, the 3.5" form factor matches standard desktop drive bays and uses the IDE Ultra ATA100 / ATA-6 interface with a 40-pin connector and legacy Molex power connector.
Set the jumper to Master for a single drive or the primary drive on the cable; set to Slave only if a second drive shares the same IDE channel.
Check SMART attributes monthly using a tool like CrystalDiskInfo; watch for rising reallocated-sector counts or seek-error rates that signal mechanical wear.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?