Seagate ST1000NM0045 1TB 7200 RPM SAS 12Gb/s 128MB 3.5" internal hard drive
- 1 TB
- SAS 12Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 TB SAS 12 Gb/s enterprise hard drive with 7200 RPM, 128 MB cache and CMR technology for 24×7 bulk-data workloads
Capacity 4TB
The Seagate ST4000NM0025 is a 4TB 3.5-inch internal hard drive built for enterprise storage servers and arrays. It uses conventional magnetic recording technology and a SAS 12Gb/s interface to deliver consistent performance in 24x7 bulk-data workloads.
The bare drive mounts in a standard 3.5-inch bay and connects via SAS data and power cables to a compatible controller or backplane. Installation fails when the host system lacks a SAS HBA or RAID card, as the drive will not operate on a standard SATA-only motherboard port.
Verify that your server or storage enclosure supports 12Gb/s SAS connectivity and provides the correct power connector for enterprise drives. Confirm the chassis can accommodate a 26.10mm drive height and that your RAID controller or HBA firmware is current for 4TB capacity recognition.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Seagate |
| Product line | Enterprise Capacity 3.5 |
| Model name | ST4000NM0025 |
| Total capacity | 4 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 7,200 RPM |
| Mean latency | 4.16 ms |
| Storage | |
| Cache memory | 128 MB |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.85 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.69 kg |
| Package size | 156 × 135 × 3 mm |
Other versions of this model
Check that the BIOS or RAID controller detects a 4000 GB SAS drive at 12 Gb/s, verify SMART data shows zero reallocated sectors, and run a full surface scan that completes without errors.
You receive only the 3.5-inch drive itself; you must provide a SAS 12 Gb/s cable, a compatible backplane or HBA, mounting screws, and a 12 V / 5 V power connector.
Select the SAS 12 Gb/s model (ST4000NM0025) — it matches the backplane speed and uses the 512n sector format for direct compatibility.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?